A couple of things to be aware of:
It will have too much timing on boost so keep the boost below 1 bar until it's been tuned.
If you have a Cold Air intake don't forget to change the intake to 'apexi Super intake' in the Airflow meter settings......
Turn off the O2 feedback under the ETC tab (default is on) otherwise the o2 sensor will pull it lean all the time.
HTH
Rossco
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]
|