Hi All,
Welcome to my blog!
I'm going to attempt to list the mods completed on my car so far and any future mods as I do them.
Welcome to my blog!
I'm going to attempt to list the mods completed on my car so far and any future mods as I do them.
Mod Update
Thought I'd better bring my blog up to date in regard to the bits & pieces I've added more recently:
Process West Cold Air Intake
Prospeed Silicone induction tube
GD top mount cooler
05 Sti front seats ('cause I'm fat!)
Now running 1.5 -1.6 bar with AFR's of 11.4 @ 1.6 bar.
Process West Cold Air Intake
Prospeed Silicone induction tube
GD top mount cooler
05 Sti front seats ('cause I'm fat!)
Now running 1.5 -1.6 bar with AFR's of 11.4 @ 1.6 bar.
Total Comments 6
Comments
-
good farking work mate, you running a water spray on the tmic? My logs tell me its a good idea or watch timing get pulled big time when its 30 c plus.Posted 24-12-2009 at 02:45 PM by American Dave 
-
Get that VF22 goin'!!Posted 24-12-2009 at 02:50 PM by Mike
-
what was involved in fitting the 05 seats? was it just straight swap of rails, or was modifying reqd?Posted 24-12-2009 at 07:31 PM by Jezza
-
Bolt in fit jezzPosted 24-12-2009 at 11:27 PM by Rossco
-
Now running 1.5 -1.6 bar with AFR's of 11.4 @ 1.6 bar.
nice Posted 25-12-2009 at 08:30 AM by munya 
-
Working on the water spray system using a PWM timer I've built.......It uses fuzzy logic to calculate the pulse time for the motor, plus a manual override....It'll be using a small EFi pump to supply low volume but high pressure = really fine spray.Quote:Originally Posted by American Dave
good farking work mate, you running a water spray on the tmic? My logs tell me its a good idea or watch timing get pulled big time when its 30 c plus.
Waiting to fit my GD STI top mount.... Just need to mod my splitter again and it'll be done.Posted 25-12-2009 at 01:58 PM by Rossco
