I have just fitted some halo headlights I got from Ultrex(thanks to Rob) to my WRX MY04 , my question is this, does anyone know how to adjust them, as the beam is way to high .

Cheers Adrian

There is a screw on the edge of the headlight, use a flat head and you adjust it with that.

do it around sunset, face your car against a wall and turn on headlights. Adjust it until its right. If I recall right clockwise turn is to adjust the beam downwards.

__________________
just power out of it!

Awesome, thanks boxorbeast, will adjust tonight .

yeah, use the screw on the headlight. and make sure you park a decent distance (not too close) from the wall when adjusting it so that you get a true feel of how "high" other driver will see your light.

The actual setting of the light isn't a problem , it was finding the adjuster screws, I found 2 screws next to the projector cover and after some checking online it seems these are the ones.

Thanks again peeps