|
Register | Diddy Kart | Articles | All Albums | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
LinkBack | Thread Tools | Display Modes |
#2651
|
|||
|
|||
ive got the same shape and year as trolley 2008 wrx but mine is blue
|
#2652
|
||||
|
||||
Quote:
I wanted 235 but can't get 235 in Yokohama S-Drives locally unfortunately. Go 235 if you can.
__________________
[I]trolololol[/I] |
#2653
|
||||
|
||||
Quote:
but as far as i am aware, the xxr527 only come in .25 and .75.. whereas I ordered the xxr521 that only come in .0 or .5 Just camber it in, otherwise they have 8.75+35, sure you would be able to see if they will clear the brakes.. Otherwise look for a different style of rim.
__________________
:) |
#2654
|
||||
|
||||
Rims
Hi all
Just wondering what 18x8 rims will fit my bugeye wagon? Bought a set from ultrex & sadly the do not fit. They have a +42 offset But unfortunately stick outside the guards by about an inch- spewing:-( Any advice will be greatly appreciated Cheers |
#2655
|
||||
|
||||
This doesn't sound right mate, positive camber much?
|
#2656
|
||||
|
||||
17 X 7 +55 - Stock Rims
18 X 8 +42 - ULTREX Rims 26mm extra poke/further out then stock. SHOULD look like this: 1010TIRES.COM - Wheel Offset Calculator I might be out on my WRX stock rims. Been a while since I needed those specs
__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR Last edited by Dan [GTI]; 15-08-2013 at 09:42 PM. |
#2657
|
||||
|
||||
Quote:
I'm running Ultrex Viper Hyperblack 18 x 8.5 +44 offset with 225/40/18 tyres.... On a 05 WRX Wagon fronts sticking out 10mm rears look flush with guard or at worst 5mm sticking out Did have issues when running 235/40/18 tyres rubbing on guards front and rear on bumpy roads but since the 225's have been on the rims theres been no rubbing issues
__________________
It's your car, It's your story, So don't let someone else write the book.... MCM Last edited by Tiigga; 16-08-2013 at 10:48 AM. |
#2658
|
||||
|
||||
As stated, doesn't sound right. Shouldn't be anywhere near 25mm of poke. First thing I would do is get your alignment checked. I had a tire poking out by 10mm when I first purchased my rims last year. Turned out I had a shit alignment done.
__________________
[I]trolololol[/I] |
#2659
|
||||
|
||||
Rims
Hey all
Everything is all good. Alignment was out now they sit flush on the rear And stick out about a 1-2 mm out on the front. Running 225 tyres not much Clearance in the inner guards but all good. |
#2660
|
||||
|
||||
Good to hear! Who did the initial alignment, and who did you get to do the current one?
__________________
[I]trolololol[/I] |
Tags |
cr kai, fo real, post, rim job, rims, tino is a midget |
Thread Tools | |
Display Modes | |
|
|