What did you get for your WRX today?
 

I thought I would make this thread for people to post what they have bought or received recently for their pride and joy.

Doesn't matter if its something big or small, post it anyway.

I'll start small.

I had a slow leak in the left rear. Got a new "legit" Work valve stem installed. #streetcreds

On the bright side, I don't have to put 20 pound of air in once a week now and check the tyre every time I get in.

Surprised BP don't charge for air come to think of it.

I got a few things in the mail today.
[IMG]https://lh3.googleusercontent.com/-jOcQ9tpugss/Ve0PNuSFyyI/AAAAAAAASFM/f6t6cWnCLxM/w750-no/20150907_134326.jpg[/IMG]
APEXi "POWER INTAKE FILTER"
Part No. 503-N101

[IMG]https://lh5.googleusercontent.com/-kbJA43pYKTA/Ve12dbbTBMI/AAAAAAAASHI/DIA4JNtOMhM/w750-no/20150907_210434.jpg[/IMG]
NGK Iridium spark plugs
Part No. BKR6EIX

Not today but I got these recently too.

[IMG]http://i.imgur.com/fVCNngB.jpg?1[/IMG]

[IMG]http://i.imgur.com/IEij2aS.jpg?1[/IMG]
Blitz ZZ-R Dampers / Coilovers
Part No. 92768

[QUOTE=RichX;829665]Got a new "legit" Work valve stem installed. #streetcreds[/QUOTE]

That wheel goes faster than the others now :thumbsup:

the most recent was a avo intake hose and a retune :)

using the Perth-WRX mobile app

I got my steering wheel back today after nearly 2 weeks.

Black suede.

[IMG]https://lh5.googleusercontent.com/-LiLuJ8NvFRQ/VgjJT-lM5SI/AAAAAAAASkk/RpCcqG09wJk/w750-no/20150928_142844.jpg[/IMG]

another fucken afm ... 3rd so far..

using the Perth-WRX mobile app

[QUOTE=2DIE;830602]I got my steering wheel back today after nearly 2 weeks.

Black suede.

[IMG]https://lh5.googleusercontent.com/-LiLuJ8NvFRQ/VgjJT-lM5SI/AAAAAAAASkk/RpCcqG09wJk/w750-no/20150928_142844.jpg[/IMG][/QUOTE]

how much did that cost you dude ? and were did youget it done ? :)

using the Perth-WRX mobile app

It was $220 from Planet Soarer (in Adelaide), I just posted it there and he posted it back even though its not that far from me.

From what I've read the guy did OEM wheels for Mitsubishi and Holden/HSV.

steering wheel looks amazing !!!
cat back 3" stainless straight pipes with 2.5" twin exits for the 09 wrx =]

carline mufflers newcastle street highly recommend !

Didn't get it today but rather Wednesday last week :)

Invidia Q300 Titanium Tip CBE

[IMG]http://i.imgur.com/gPflVwO.jpg[/IMG]

[QUOTE=Slap Dash;830615]Didn't get it today but rather Wednesday last week :)

Invidia Q300 Titanium Tip CBE

how does it sound ?? if you dont mind me asking..
like nice tight note or loud and droney ? heard they are quite good

[QUOTE=Giuffy91;830616][QUOTE=Slap Dash;830615]Didn't get it today but rather Wednesday last week :)

Invidia Q300 Titanium Tip CBE

how does it sound ?? if you dont mind me asking..
like nice tight note or loud and droney ? heard they are quite good[/QUOTE]

Bloody nice tight note as you put it.. I did a lot of research & am 100% happy with the results..

Targa West 2016 prep continues
 

Last 5 days effort

Firewalled the car

Purchased and fitted fuel pump and swirl pot (not plumbed in yet until new engine is running)

Engine bay cleaned ready for new engine

New short block with my reconditioned head/ancillaries/VF34 turbo/exedy sports clutch put together today

On the final run now and only waiting for the cage to arrive so I can finish off the interior as already have OMP seats/seat sub frames/steering wheel.

And this is the reason for the new engine (death rattle on the McRae sprints) this sump was binned as too hard to try and get all the bearing deposits out of all the nooks "n" crannies

Well my bug got..dw300 fuel pump to feed the thirsty Bosch 044 external on the surge tank, 3bar map sensor, fuel pressure reg, billet fuel rails, expansion loom for the link Ecu...umm oh yeah id1000 injectors..still to arrive continental flex fuel sensor. Now to find time to get all installed and tuned for corn fuel bp98 flex tune....

[QUOTE=2DIE;829667]I got a few things in the mail today.
[IMG]htps://lh3.googleusercontent.com/-jOcQ9tpugss/Ve0PNuSFyyI/AAAAAAAASFM/f6t6cWnCLxM/w750-no/20150907_134326.jpg[/IMG]
APEXi "POWER INTAKE FILTER"
Part No. 503-N101

[IMG]htts://lh5.googleusercontent.com/-kbJA43pYKTA/Ve12dbbTBMI/AAAAAAAASHI/DIA4JNtOMhM/w750-no/20150907_210434.jpg[/IMG]
NGK Iridium spark plugs
Part No. BKR6EIX

Not today but I got these recently too.

[IMG]ttp://i.imgur.com/fVCNngB.jpg?1[/IMG]

[IMG]htp://i.imgur.com/IEij2aS.jpg?1[/IMG]
Blitz ZZ-R Dampers / Coilovers
Part No. 92768[/QUOTE]

Can I ask where you got the Blitz coils and would you recommend them?

Green TEIN Coilovers... :D

Just ordered myself a Invidia race cat back system with a invidia catless dump-pipe! Should be seeing it in a week..

Bring on the loud noises :D

using the Perth-WRX mobile app

Some good news today, Just arrived at work full MY13 lip kit. A Very quick turnaround & delivery from Rob @ Ultrex.

Going to install either tonight or this weekend.. Soo fcking keen.

e85

[QUOTE=Slap Dash;830783]Some good news today, Just arrived at work full MY13 lip kit. A Very quick turnaround & delivery from Rob @ Ultrex.

Going to install either tonight or this weekend.. Soo fcking keen.[/QUOTE]
Be careful when leaving it out in the sun. Member on here has had his Ultrex lip warp on him.

[QUOTE=Brodz;830788]Be careful when leaving it out in the sun. Member on here has had his Ultrex lip warp on him.[/QUOTE]

Have owned one previously for the Hawkeye.. No warping.. Not to mention the thing is garaged & undercover 90% of the time so don't think it will be an issue.. Even if so in the unlikely circumstance, I'm sure Rob would look after this community.

STi Group N Engine Mounts arrived today. CMA shipped them very quickly. Interested to see if these make any noticeable difference, and more importantly stop some issues I have.

[IMG]https://scontent.fper1-1.fna.fbcdn.net/hphotos-xpt1/v/t1.0-9/12144906_10153778545293319_1124786665486110955_n.jpg?oh=5f3e90b851dae82a353ff4eebda3e8a5&oe=56906F90[/IMG]

[IMG]http://members.ii.net/~richard.smith/Scoob/Mount.jpg[/IMG]

[QUOTE=Brodz;830788]Be careful when leaving it out in the sun. Member on here has had his Ultrex lip warp on him.[/QUOTE]

Havent seen one warp when on the car. PU can warp in the box in transit if its hot..but lay it flat in the sun for an hour - it will soften and then install and should be all good.

We make them soft so they have flex in them and dont break when you scrape it :)

[QUOTE=ULTREX;831078]Havent seen one warp when on the car. PU can warp in the box in transit if its hot..but lay it flat in the sun for an hour - it will soften and then install and should be all good.

We make them soft so they have flex in them and dont break when you scrape it :)[/QUOTE]

Had my ultrex lip on my MY11 STI for 2 years now, no warping, still in perfect condition :thumbup:

[QUOTE=ULTREX;831078]Havent seen one warp when on the car. PU can warp in the box in transit if its hot..but lay it flat in the sun for an hour - it will soften and then install and should be all good.

We make them soft so they have flex in them and dont break when you scrape it :)[/QUOTE]

Hey there had similar experience actually with mine. Had no idea about the the sun thing at the time.

Maybe include that enclosed in the box? all I know when it was originally installed it fit fine. But later had a massive gap which means it happened to be bent during the time of install but not to a point where i could see that it was.

Reinstalled it but had to put more holes in my bumper.

Not today but both bought in about the last week.

[IMG]http://i.imgur.com/rgOo8S9.jpg[/IMG]

[IMG]http://i.imgur.com/AmJUdiZ.jpg[/IMG]

I should post a screenshot of my build spreadsheet as most of the parts aren't arriving on my doorstep unfortunately.

[QUOTE=TROLLEY;841487]I should post a screenshot of my build spreadsheet as most of the parts aren't arriving on my doorstep unfortunately.[/QUOTE]
I'd like to see if it you have it handy.

Sent from my SM-N9005 using Tapatalk

Today I got my WRX a day off, pursuant to an 880km cruise through the countryside over the weekend. :)

[QUOTE=2DIE;841489]I'd like to see if it you have it handy.[/QUOTE]

Check out my driveway thread update - [url]http://www.perth-wrx.com/vb/841504-post438.html[/url]

[QUOTE=TROLLEY;841505]Check out my driveway thread update - [url]http://www.perth-wrx.com/vb/841504-post438.html[/url][/QUOTE]

Is that you Tim?

[QUOTE=WRX-DAZ;844413]Is that you Tim?[/QUOTE]

Nope, that is Craig, also known as Captain Sandy!

err wot