|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Automatic Electronic Water Spray Controller (Finished with Pics)
http://www.jaycar.com.au/productView...Max=&SUBCATID=
http://www.jaycar.com.au/productView...Max=&SUBCATID= Purchased the kit yesterday and it is pretty straight forward. Jaycar do both kits required off the shelf. will post some pics and update progress to let you all know if it is worth it or not.
__________________
RIP POSSUM 3" Invidia Zorst Last edited by WHITEMY08; 02-03-2008 at 12:56 PM. Reason: Title |
#2
|
||||
|
||||
I've been using one for a couple of years, 5 sec delay on the button seems to be the best, don't really use that much water & if you want more just hit it again.
__________________
Beaten up old 98 Gen 2 Liberty, 13.0, stock V3 STI running gear. 07 Transit motor home 69 VF & 70 VG Valiants needing full restoration Yamaha Zooma 50cc rocket hopefully going with the Transit. |
#3
|
||||
|
||||
no pressing of buttons, fully automatic based on temp + load = spray
__________________
RIP POSSUM 3" Invidia Zorst |
#4
|
||||
|
||||
Was easier than anticipated.... only took just over an hour to put together.
Unit is smallish 140x60x25 Bench test worked straight out, simulated load/boost and 1 sec delay, when sensor temp drops the unit cuts out, will have to calibrate in the car. Only cost about $40 including the mist spray nozzles and yes if you would like one I am sure something can be sorted
__________________
RIP POSSUM 3" Invidia Zorst |
Tags |
controller, electronic, spray, water |
|
|