O2 Sensor
Guru's
I'm currently putting on the ceramic coated dump pipes and headers to my gc8. I have encountered a few issues which i require some advice/ part numbers. The o2 sensor hole in the dump pipe was welded up by the previous owner and as a result i need a longer o2 sensor or harness. I do have location infront the the turbo to place the o2 sensor but it will not reach. I can not lengthen the wires between the plug and the sensor as the wires are stainless steel. can i buy a longer compatible o2 sensor? can i buy a harness adapter? would likes some help. tristan |
The O2 sensor I installed recently had the wrong plug.
Point is I spliced the old plug / wires into the new sensor wires using end to end crimps. I then heat shrinked the individual crimps and then the whole set of wires. Has been working successfully. The same could be done to lengthen the wires. |
All times are GMT +8. The time now is 08:20 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO