Hey guys,

I have a pnp m800 which utilizes the air con outputs of the MoTeC to run secondary injectors.. So in essence I run 4 injectors for the primaries and 4 for the secondaries..

One injector on the secondary has fir some reason stopped pulsing we've checked the loom and there seems to be no broken wire.

Long story short we've decided to disconnect the secondary injectors and just run one set. However the secondary outputs were switched and actually run the primary injectors!!

But my map has two sets if injector maps which we need to swap over.. Can someone point me in the direction of how to do so or can I send someone the map to change for me.. The injectors are much bigger decaps to id2000s so will need to change the trim but I only need the car running and will get a full time once asg reopens..

__________________
I'm a jockey kunts...

Tried Stace or Matt? I have his mobile number if you want it.

Brendon

__________________
Losing is worse than death. You have to live with losing....

Brendon I'll try them in Monday if they don't see this beforehand being Chrissy n all.. Haha

But I think they should be able to do it if willing. As I said and want car drivable..

__________________
I'm a jockey kunts...

pretty sure Mao's mechanic warick knows about it..

email me a copy of your map, there are some caveats running 8x injectors.

also take a high-def photo of the soldered links on the underside of the ECU

__________________

Long live the WRC

Asome stace ive sent an email to stacey.squire@rcrtom.com.au

Cheers,

Tino

__________________
I'm a jockey kunts...