Perth-WRX.com

Perth-WRX.com (http://www.perth-wrx.com/vb/cmps_index.php)
-   Mechanicals (http://www.perth-wrx.com/vb/mechanicals/)
-   -   GC8 Radiator suggestions (http://www.perth-wrx.com/vb/mechanicals/48624-gc8-radiator-suggestions.html)

Okibi 21-04-2012 06:17 PM

GC8 Radiator suggestions
 
My China spec ASI radiator is leaking around some of the fins (and has already been repaired once because it sprung a leak in the pipe for the hose to the reservoir). The stock radiator is back in for now but the top inlet is cracked etc.

It's a '94, What solutions do others recommend?

GX-REX 21-04-2012 06:25 PM

I had a china spec alloy in my last car and it leaked very slowly after a few weeks of going in. Oem is the way to go.

Pimpreza 21-04-2012 06:25 PM

New end tanks on your stock radiator.

Joshiemitsu 21-04-2012 06:46 PM

I have a '97 radiator, second hand taken off my RX as I did a STi conversion, no leaks I know of, you can have for cheap if it will fit/you want it?

GX-REX 21-04-2012 06:56 PM

N/A rad is different to a Wrx one.

Tracey at A-Part stocks new rads under $250

Marti 21-04-2012 07:02 PM

Nat rad should stock them

Okibi 21-04-2012 08:24 PM

So no better solutions than an OEM one unless you spend PWR prices?

SPEC IV 21-04-2012 08:34 PM

I just bought a KOYO branded OEM style radiator from NATRAD in Malaga.

Cost me just over $300 from memory.

Had it in for over 2mths now with no dramas.

Marti 21-04-2012 08:49 PM

Try just jap they do some pretty good quality cooling pro radiators

Alternate 12-10-2014 03:26 PM

Epic thread bump.

My radiator has finally given up and cracked the drivers side end tank rather badly. It overheated on Friday and luckily I was close to home. Highly relieved about this as a run through the hills was on the cards... could have been a lot worse.

Anyhoo, obviously up for a new one, so looking for some advice. I've been reading the forums quite a bit, but the threads are a bit old, and perhaps the advice has changed over the years.

It looks like the options are:

OEM from a wrecker
Koyo OEM replacement
Chinaspec Alloy off eBay

My hoses are relatively newish, but I'm thinking of replacing with silicone and probably will get an ASI kit off eBay - that is unless Rossco's view on them has dramatically changed :)

My car is more of a weekend warrior than a daily, so something with a bit more efficient cooling would be nice, without the bank breaking pricetag of a PWR or other performance equivalent.

I am leaning towards the OEM spec Koyo, but just wondering if anyone has got some eBay ones that they can vouch for?

Is Natrad still the place in Perth to get a Koyo?

Cheers!


All times are GMT +8. The time now is 01:00 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO