Hi guys.

Is there somewhere in Perth that can manufacturer accessory belts to spec?

In particular I need quite a short belt made because I am removing the air-con in my car..

Cheers.

Adrian.

__________________
[BG5WRC] --KBracing International-- Rallye-Info.com

Go to any bearing & transmisson place like BSC motion & transeals, let them know the profile & new length required.

__________________
Range Rover Evoque Si4 Dynamic

You wont need a belt.. The only thing on that belt is the aircon and the tensioner pulley. Just take it off...

Appreciated Stifull, but this is not for a Subaru and there is only one accessory belt that drives a/c and alternator..

__________________
[BG5WRC] --KBracing International-- Rallye-Info.com

Try Veale Auto Parts, they are the dayco agent and should be able to match one off the shelf just try to get a rough overall length

Thanks, yeah nothing suitable in the Dayco range.

Thanks Sethor, BSC couldn't help but lead me to Rydell Industries who might be able to get me in a suitable belt from the Gates range Rydell Industrial - Gates Industrial Belts and Hose

__________________
[BG5WRC] --KBracing International-- Rallye-Info.com

CBC Bearings have a good range of Gates. They will need to know the "V" pattern so take the old belt and set your adjuster 1/2 way and measure the length required.. The part number is the length usually .. eg 920=920 ml..

Transeals welshpool they have a massive selection on hand