Tps wiring help
 

Hi guys,
I've recently swapped my 95 inlet manifold for a 97-98 model & I'm up to the final hurdle (I think)....

As per photo, the tps on 95 is 4 wire, 97 is 3 wires. From googling, searching & trawling different forums, as you can see the colours are in different positions and I'm trusting the colours correspond the same throughout the years. I've come to this conclusion, but before I plug in, can anyone offer assistance?

Black = 0v
Red = 12v
White = signal wire

Drop the brown wire and plug the red, white & black wires in as per their position for the correct 97 plug..

Really appreciate any help..

[ATTACH]11331[/ATTACH]

I've got the wiring diagrams from when I changed out my manifold to a later model one at home somewhere. I'll see if I can find it when I finish work in the morning. Failing that, Tuna would most likely be able to help.

Your a gentleman. See how you go.

I could only find 99-00 & then didn't have program to open the rar files.

Cheers

winrar is the program you need to open rar files and it's a free program. May save you some time?

[url]http://www.rarlab.com/rar/winrar-x64-50b8.exe[/url]

Best of luck with it!

^^ that link is for the 64bit version.
Not too sure on the specifications of the OP's computer, so just in case here are both the 32 and 64bit installers.

[URL="http://rarlabs.com/rar/wrar50b8.exe"]WinRAR x86 (32 bit) 5.00 beta 8[/URL]
[URL="http://rarlabs.com/rar/winrar-x64-50b8.exe"]WinRAR x64 (64 bit) 5.00 beta 8[/URL]

Cheers Soksta, Hadn't even occured to me than anyone uses 32 bit any more. :P

I obviously wasn't reading your original post during the early hours as the pinouts/diagrams I drew/have were from a MY99 to a GD model manifold. Never mind me.

That's cool mate, & thanks to others who posted, I think I'm now sorted... (Find out when we fire it up...)

Cheers