Saa9003 wiring loom install - help
I have tried to install the key in bypass module and I cant find where the 2 pin connector plugs into (part of the diode pack)
Has anyone installed one, or have any pics? |
1 Attachment(s)
Hi ALL,
I thought I would share my findings below on the quick sketch I did. Incase anyone else has similar issues. For some reason my loom didn't have a 2 pin black connect to fit on the Subaru harness. I decided to trace from the sensor and to cut the wires from the connector, and installed a 2 pin plug and socket from Jaycar to ensure the loom fits. All you really need is to splice the wire and solder a diode across the green wire to the white/red, which would cost under 50 cents. I preferred the loom due to being tidy. |
All times are GMT +8. The time now is 05:01 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO