|
Register | Diddy Kart | Articles | All Albums | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
F/S. Sexy Yeti Shed Load.
Item Description: Blouch Dominator 2.5 XTR turbo. Based off the Garrett GT-3071R, so you know its built using a high quality CHRA. But with a custom Blouch billet CNC compressor wheel, and housings to allow Subaru stock location bolt on fitment. Has the 10cm^2 turbine housing and the 3" compressor inlet and the upgraded wastegate actuator optioned. Turbo is in excellent condition and has hardly been used. Maybe 100kms at the track and a few thousand total. Zero lateral shaft play. Has the bullet style nut and the red anodised compressor wheel. 3" inlet means a tight fit and you must do a TGV delete. I have fitted a -4 line from the pressure refference to the wastegate actuator. You do not need to run a BCS unless you want more than 1.5bar boost. This turbo is an amazing turbo. It spools fast and makes great power.
Condition: Great. Age/Mileage: very low. Price: $1900 Pictures: (Still has the white paint used for balancing visible on the turbine.) Item Description: Mishimoto thermostatic oil cooler take-off. Good overall condition. Has had an 80°c Mishimoto thermostat valve unit fitted. (Think original thermostat was a higher temp rating.) Also includes the additional metric banjo to -10 fittings. These are needed when fitting to ELH etc headers. The banjo bolt seals are worn and should be replaced. They originally used a dowty seal, but i am confident you could use a aluminium/copper crush washer just as effectively. Condition: Good. Age/Mileage: unknown. Price: $120 Pictures: Item Description: PSR 3" Silicone inlet. Suit SG Forester XT, and various other Subaru models. Condition: Good. Has had some of the barbs removed to suit my plumbing applications. Should be easy enough to replace or adapt to suit your application. Age/Mileage: low KM. Price: $200 Pictures: Item Description: X-Force Down Pipe and Perrin heat blanket. Condition: Used but good. Has a splitter installed. Has the Perrin heat shielding on it included. Age/Mileage: few years. Unknown km. Price: $300 Pictures: Im lazy, and this is a picture of it when it was new. It looks just like this, except not new. Contact: Bram Email: PM please. Phone number: PM please. Location:Perth WA
__________________
Doing it for all the wagons out there Last edited by Bram; 22-10-2016 at 09:37 PM. |
#2
|
|||
|
|||
BOV and intercooler air splitter sold.
PW TMIC still available minus the duct/splitter part. $500
__________________
Doing it for all the wagons out there |
#3
|
|||
|
|||
TMIC all gone.
__________________
Doing it for all the wagons out there |
#4
|
|||
|
|||
CAI gone.
Turbo, turbo inlet and oil cooler T-stat still here.
__________________
Doing it for all the wagons out there |
#5
|
|||
|
|||
Bumpgasm
__________________
Doing it for all the wagons out there |
#6
|
|||
|
|||
Down pipe added.
Item Description: X-Force Down Pipe and Perrin heat blanket. Large bell-mouth design. Condition: Used but good. Has a splitter installed. Has the Perrin heat shielding on it included. Age/Mileage: few years. Unknown km. Price: $300 Pictures: Im lazy, and this is a picture of it when it was new. It looks just like this, except not new anymore.
__________________
Doing it for all the wagons out there Last edited by Bram; 22-10-2016 at 11:27 PM. |
#7
|
|||
|
|||
Bump.
Dump pipe on lay-buy. Consider it sold pending finance approval. Turbo and inlet and thermostat still forsale. Will chuck a free inlet in with the purchase of a pre-loved turbo. Get in quick, stocks limited.
__________________
Doing it for all the wagons out there |
Thread Tools | |
Display Modes | |
|
|