|
Register | Diddy Kart | Articles | All Albums | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Just put a globe in the CEL and ABS now having dramas
Hi all, new to the forum as I just bought a '95 GF8.
Bit of background on the car.. I bought it with an overheating problem (blown head gasket) which is fixed now. The car has had a new rad support panel welded on at some stage and doesn't look like the best job in the world as holes don't line up properly and are elongated. So.. I just put globes in the CEL socket and the ABS socket on the dash. Haven't tried to tackle the ABS faults yet but the ECU has stored fault codes; 21 (engine temp), 22 (knock sensor) and 35 (canister purge valve). I've replaced the knock sensor with a later liberty one (had to change the plug). I've unplugged the temp sensor and checked the contacts and they seem fine. I can't seem to find a purge solenoid in the engine bay anywhere. There is a vacuum actuated valve on the second purge line that runs from the charcoal canister to the air box but that is it. Does anyone have any idea what sensor is throwing this code 35? Next question is.. is there any way to erase these codes without driving the vehicle as it is not licensed yet? Thanks in advance for any help, Paul.. |
#2
|
|||
|
|||
Purge valve would be to the charcoal canister for fuel. It's under the manifold that's code 35
|
#3
|
|||
|
|||
Yeah it's not there.. did the research and found that the white/blue wire in the car loom (purge valve wire) ran to an empty hole (no pin) in the engine loom plug. I put a pin in there and ran it to a purge solenoid I had on another engine along with power sourced from the ISC and hey presto, no CEL..
Now to sort my ABS faults out.. |
Tags |
abs, cel, dramas, globe, purge valve, put |
Thread Tools | |
Display Modes | |
|
|