Perth-WRX.com

Perth-WRX.com (http://www.perth-wrx.com/vb/cmps_index.php)
-   Your Driveway (http://www.perth-wrx.com/vb/your-driveway/)
-   -   The Retsurrection (http://www.perth-wrx.com/vb/your-driveway/53792-retsurrection.html)

mitchwnz 19-03-2013 02:31 PM

[QUOTE=Spektre;743876]yes, thankyou, for being the five hundreadth person to tell me..[/QUOTE]

Fuck the others, listen to me ya cnut! :D

jEstEr? 19-03-2013 02:52 PM

Low km 2009 JDM STI - (would have loved a Spec C ...)
- EJ207
- Twin scroll IHI VF49
- Quad AVCS

I have already ordered the necessary parts to do the air pump delete. I will hang onto it until next time someone is quoted $2200 from Subaru to replace theirs ;)

I'll be pulling the red "drive by wire" manifold off as we had done the cable throttle conversion on my original engine, so manifold / throttle body / tgv / injectors etc will be for sale.

Cable manifold will sit on these bad boys, TIC composite TGV deletes

[img]http://img46.imageshack.us/img46/8585/dscn0438oc.jpg[/img]

Bolting onto this will be the 09 STI TMIC I ran on my previous engine, I scored the TMIC brackets on this engine too which is killer!

I'll delve into one of my "box'o'parts" that I have been collecting for the last couple of years and grab out the Cusco engine / gearbox mounts (under the foggie covers) Also a custom Kap Industries pitch mount (post up a pic Russ?)

[img]http://img571.imageshack.us/img571/6015/dscn0393c.jpg[/img]

jEstEr? 19-03-2013 02:53 PM

[QUOTE=Mike;743860]Plastic manifold was only on the EJ255's. EJ257's still copped the good mani.[/QUOTE]

It is also on Japanese EJ20xx :) (my MY06 EJ20Y had one)

jEstEr? 19-03-2013 03:04 PM

Hrmm what else:
- Needs an exhaust, I got part of the twinscroll dump which is basically only good for the flange (hehe, flange) pic below. But I don't see the point in putting something stock on
- Silicone intake. Not necessary but I [i]want[/i] one.
- locate my collection of top feed injectors & decap
- Crank pulley. Once again, not necessary but you feel the difference
- Clutch. Likely a twin plate ORC if I can rustle up the cash.

Hrmm, that should be about it. I am having a very hard time not pulling the exhaust manifold & turbo off to port / ceramic coat / wastegate mod. Who doesn't like 500rpm less lag?

Actually at one point 4 years ago I actually owned a OEM twinscroll dump complete, I have no idea where it went :/ Almost as useful....
[img]http://img831.imageshack.us/img831/3690/dscn0427qv.jpg[/img]

American Dave 19-03-2013 03:10 PM

Nice mate it is coming together quick now. I wish I had bought the TIC TGV deletes

RUSSGT 19-03-2013 03:16 PM

I dont have a pic mate. Didnt i send one or two to you?

Those parts are so nice! I think i guessed jdm sti engine! Woot.

jEstEr? 19-03-2013 03:17 PM

[QUOTE=American Dave;743901]Nice mate it is coming together quick now. I wish I had bought the TIC TGV deletes[/QUOTE]


lol @ coming together quick. 2 years!

That said, it will slowdown from this point on as I have taken on a FIFO secondment so will only see the car once every 4 weeks :/

Some google images of the airpump delete

replace this

[img]http://imageshack.us/a/img834/4967/airpump.jpg[/img]

with these

[img]http://imageshack.us/a/img43/5548/photo9edo.jpg[/img]

jEstEr? 19-03-2013 03:18 PM

[QUOTE=RUSSGT;743904]I dont have a pic mate. Didnt i send one or two to you?

Those parts are so nice! I think i guessed jdm sti engine! Woot.[/QUOTE]

Yeah i don't think I saved them :/

American Dave 19-03-2013 03:20 PM

3/1 ftw ?

jEstEr? 19-03-2013 03:40 PM

[QUOTE=American Dave;743908]3/1 ftw ?[/QUOTE]

yerp. more money for snowboarding :P


All times are GMT +8. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO