Perth-WRX.com  

Go Back   Perth-WRX.com > Vendors and Sponsors > Evolution R
Register Diddy Kart ArticlesAll AlbumsBlogs FAQ Members List Calendar Search Today's Posts Mark Forums Read


Welcome to Perth-WRX, click here to register!

 
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-06-2011, 11:11 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default Exedy Stage 1,2 and 3 Clutch Kits for GC8,GDA/B

Hi Guys,

Evolution R is the largest stockist of Exedy Racing Clutches here in Western Australia.

We stock Exedy Racing Clutch Kits for the following vehicles:
1) Subaru 5-Spd (2.0L + 2.5L -- both Pull type and Push Types are in stock.)
2) Subaru STi 6-Spd (2.0L +2.5L)
3) Mitsubishi EVO 4-6
4) Mitsubishi EVO 7-9
5) Mitsubish EVO X
6) Nissan Skyline R32/R33/R34 GTST-T/GTT/GTR (RB25DET + RB26DETT)
7) Nissan Silvia/200SX S13 + S14
8) Nissan Silvia/200SX S15
9) Honda (All K-series Engines) -- Go here to see Civic Type R K20 FN2 install:
http://www.perth-wrx.com/vb/evolutio...8-gda-b-9.html
10) Suzuki Swift ZC Sports
11) We now stock the 4.86kg Exedy 6-Spd Lightened Flywheel. P.WRX is $585 -- supply only. (See below pics.)
12) Exedy Clutch Master Cylinder upgrade for EVO X -- $350 (see below for pics and details)
13) Exedy Pull Type Thrust Bearing for the Subaru pull type pressure plate -- $70
14) Exedy Pull Type Thrust Bearing for EVOIV-X -- $70

** Anything not kept in stock will require order and indent, which will take 1week wait from Japan.

Below are some prices for all Subaru 5-Spd and 6-Spd,
Exedy Racing Stage 1 Kit: A$950 fitted. *much better and stronger than OEM.
Exedy Racing Stage 1.5 Kit: A$1150 fitted *stronger than Stage 1 +2 with easier driving.
Exedy Racing Stage 2 Kit (discontinued): A$1050 fitted. *longer lasting ceramic clutch plate.
Exedy Racing Stage 3 Kit: A$1150 fitted. *for a mean machine.
Exedy Hyper Single Pull Type Clutch Kit: $1800 installed or $1250 supply. Go here for details:
http://www.perth-wrx.com/vb/evolutio...8-gda-b-9.html

Exedy Stage 1 Clutch Kit for Subaru:

Exedy RacingStage 1 Pressure Plate:

Exedy Racing Stage 1 Clutch plate:

Exedy Thrust Bearing:



Exedy Stage 2 Clutch Plate (Note: Rest of parts in the kit are the same as Stage 1 above except for the Clutch plate):


Introducing Exedy Stage 1.5 exclusive to Evolution R in Australia. The Exedy Stage 1.5 comes supplied with an uprated Exedy Pressure Plate, Exedy clutch plate and Exedy thrust bearing. All parts are made in Japan.

-The Exedy Stage 1.5 cushion plate is manufactured in Japan, incorporating both organic and ceramic plates.
-The Exedy Stage 1.5 is a hybrid of Stage 1 + 2, offering a stronger bite than both stages, while being less harsh on the gearbox due to its cushion design.
-This clutch kit offers more relaxed street driving than Stages 2 + 3, and is also suitable both for track and drag use.

The Exedy Stage 1.5 enables the driver to operate the clutch through an easy-to-feel half engagement thanks to the Ultra Fiber friction material all while having a high heat dissipation and torque capacity due to the integrated metal facing. Furthermore, pedal effort has been drastically reduced and improved by the re-engineering and re-designing of the engagement point with newly developed cushioning plates.




Exedy Stage 1.5 is exclusive only to Evolution R in Australia. P.WRX price - $750 supply only or $1150 installed.


We have the new Exedy Stage 3 Clutch Kit for all Subaru STi 6-Spd in stock.
Here is what we call Exedy Racing Stage 3 in Japan. This has a Exedy uprated pressure plate, plus a Exedy Racing ceramic 4-puck clutch plate. Included in the kit is also an Exedy Trust bearing.

Advantages over stage 1: Stage one offers only an organic clutch plate.
Advatages over stage 2: Stage 3 has a beefier 4-puck ceramic plate that will last a whole lot longer and give u the additional bite u need from a single plate clutch.

This clutch kit will not be an overkill. It is suitable for street with occasional track-work. I personally also own a evo 6.5 with a twin plate Exedy fitted and I love it.

Exedy Racing Stage 3 Clutch Kit for Subaru 6-Spd:




Introducing the Exedy Hyper Single Pull Type Clutch Kit including Lightend Flywheel and Thrust Bearing (Avail for Subaru 5-Spd and 6-Spd)
-- P.WRX $1800 installed or $1250 supply.

The EXEDY Hyper Single Clutch has high torque capacity and a special lightweight design to reduce the clutch disc inertia.

LIGHT WEIGHT & LOW INERTIA DESIGN
- High friction coefficient, low wear, and a special heat resistant material (T5001) has been developed enabling clutch size to be reduced and have increased durability.
- Improved durability by strong small damper disc, especially re-designed for hyper single clutch.
- Disc inertia level is less than OEM clutch for improved shift response for fast gear changes, especially in racing applications.

DIAPHRAM SPRING TECHNOLOGY FOR LONG LIFE & HIGH EFFICIENCY
- Leading technology of clutch diaphragm spring and original design superior material using a special heat treatment process, which will result in a high durability level, and prevent heat deflection, loss of clamp load, and heavy pedal effort.
- Long life and improved clutch operation due to original design for hyper single clutch.

STRAP DRIVE TYPE PRESSURE PLATE FUNCTION
- Improved clutch disengagement. (Pressure plate is forcibly separated from facing surface by strap plate)
- Prevent no-disengagement problem caused by the heat deformation of pressure plate.
- Prevent the peculiar rattle noise of lug drive type clutch.





We now stock the 4.86kg Exedy 6-Spd Lightened Flywheel. P.WRX is $585.
Note: The dots on the flywheel are just the reflection from the protective oiled layer on the flywheel.



Exedy Clutch Master Cylinder Upgrade for EVOX:
Below is the weak EVO X plastic clutch master cylinder:

Evo X clutch master cylinder upgrade -- a recommended must for solid clutch footwork:

Last edited by mao; 09-06-2013 at 10:59 PM. Reason: updates
  #2  
Old 29-06-2011, 06:25 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default

We will be working on a P.WRX member's GD WRX shortly and will post relevant results here in the next few days.

Regards,
Mao
  #3  
Old 16-08-2011, 11:22 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default

Thank you once again for your support guys. We have sold out on the stage 3 clutches and new stock will be coming in a week.

Why Exedy?
Exedy is owned by one of Japan's biggest multi-national Companies called Daikin. Yes the same company that manufactures the air conditioners. Daikin produces all the factory clutches for all Japanese car manufacturers, which means that every new factory Jap car that roll out of the dealerships uses its clutches. Therefore, Exedy will have the engineering capability and experience to develop aftermarket performance clutches.

WORD OF ADVICE: Do not compare Exedy with brands like Xtreme and other wanabe brands that the marketing company somehow forget to mention to you that they are in fact made in China. They cushion the clutch plate up for you and trick you into thinking that you have bought a strong clutch with easy driving. You will get a stong clutch with easy driving for a month and then the performance characteristics of that clutch is gone after that. Let's get real, if you want a strong clutch in a high performance car, you must learn to handle the car too. Otherwise, sell the manual and just get an AT.

Stage 3: Recommended for high performance use.
We have fitted the stage 3 on both the 5-sp WRX and 6sp STi.

The stage 3 is a touch and go clutch, which means it requires accurate footwork for both street and race use. This clutch will however require a 2wk bedding period as it has a very tough ceramic clutch plate. This is recommended if you want a true performance clutch that will last and will not burn out like an organic clutch. But be warned, gone are the days of relaxed driving but instead, join the club of true racers.

Stage 1: Recommended for daily driving.
If you are one who doesn't own a 300hp atw rex, who never goes to the drags or circuit and doesn't drive the car hard for more than a minute, use the stage 1 clutch. It is a good heavy duty clutch that will take the occasional 10sec trash from one traffic light to the next. But be warned, it will not survive a good half day at the Kwinana motoplex.

Regards,
Mao

Last edited by mao; 16-08-2011 at 11:31 PM.
  #4  
Old 17-09-2011, 05:36 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default

All Exedy (MADE IN JAPAN!) 5spd and 6spd GC and GD clutch kits now in stock. We stock the Stage 1 organic and Stage 3 Ceramic clutch kits. Please see first post for pricing and details.




New exedy clutches now have a factory white Exedy printed on the clutch plate due to the emergence of Taiwanese look-a-likes during the past year.

All Exedy Clutches are manufactured in Neyagawashi, Osaka. Pls see the box below where our clutch kits are packed in:


Below is the Genuine Exedy Heavy Duty Clutch Plate (note: Button rivets are gold in color and have always been):

Last edited by mao; 17-09-2011 at 05:58 PM.
  #5  
Old 17-09-2011, 06:21 PM
tuna's Avatar
Sign me up!
Why stop at two bar?
 
Join Date: Jul 2005
Location: Where horsepower is cool again.
Posts: 5,590
Blog Entries: 5
Thanks: 7
Thanked 107 Times in 50 Posts
tuna is a gurutuna is a guru
Default

fyi- not all exedy clutches are made in japan, only the daikin flavoured units are.

there a huge number of exedy clutches locally manufactured in victoria australia Exedy - About Exedy
__________________

Long live the WRC
  #6  
Old 17-09-2011, 06:25 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default

Think you got me wrong Tuna. I meant all my Exedy clutches for GC and GD, which are made in Japan are now in stock.

Yes you are right: Exedy clutches for locally produced cars are made in Australia.

Quote:
Originally Posted by tuna View Post
fyi- not all exedy clutches are made in japan, only the daikin flavoured units are.

there a huge number of exedy clutches locally manufactured in victoria australia Exedy - About Exedy
  #7  
Old 17-09-2011, 07:16 PM
Rossco's Avatar
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Apr 2007
Location: Perf, NOR
Posts: 5,515
Blog Entries: 11
Thanks: 54
Thanked 100 Times in 79 Posts
Rossco is a guruRossco is a guru
Send a message via MSN to Rossco
Default

Mao can you source the cerametallic type clutch disk?

Like this:

__________________
Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85
  #8  
Old 17-09-2011, 10:10 PM
mao's Avatar
mao mao is offline
Flat Four Father
Member
 
Join Date: Apr 2011
Location: Salter Point Western Australia
Posts: 2,036
Thanks: 3
Thanked 7 Times in 7 Posts
mao at standard level
Default

Hi Rossco,

How's things?

That looks like a ceramic cushion button plate. That clutch material can be remoulded if the rest of the plate is still good.

Anyway, will send Exedy an email and see what comes up.

Regards,
Mao

Quote:
Originally Posted by Rossco View Post
Mao can you source the cerametallic type clutch disk?

Like this:

  #9  
Old 18-09-2011, 11:17 AM
red dragon2002's Avatar
Subaru Tech Division
Member
 
Join Date: Mar 2010
Location: Rivervale Motherfukker
Posts: 1,418
Thanks: 6
Thanked 1 Time in 1 Post
red dragon2002 at standard level
Default

if my clutch ever dies, hopefully not in the near future! i will know where to look
__________________
98 gf8 Rip
  #10  
Old 18-09-2011, 12:28 PM
Rossco's Avatar
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Apr 2007
Location: Perf, NOR
Posts: 5,515
Blog Entries: 11
Thanks: 54
Thanked 100 Times in 79 Posts
Rossco is a guruRossco is a guru
Send a message via MSN to Rossco
Default

Quote:
Originally Posted by mao View Post
Hi Rossco,

How's things?

That looks like a ceramic cushion button plate. That clutch material can be remoulded if the rest of the plate is still good.

Anyway, will send Exedy an email and see what comes up.

Regards,
Mao
All good my end Mao! (I still haven't had the time to test that maf for you yet)

Yeah that disc is the cushioned ceramic type, I need to source a kit as the diaphram on my current clutch is going over centre at high rpm (causing the pedal to stay on the floor during high rpm shifts).

Add to that that it won't hold anymore than 1.5 bar before it slips.

Note to self: don't buy supposedly 'uprated' clutches from overseas...... Just buy an Exedy kit in the first place!
__________________
Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85
 

Tags
clutch, exedy, gc8, gda or b, kit, kits, stage

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Welcome to Perth-WRX, click here to register!

All times are GMT +8. The time now is 02:44 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO