Quote:
Originally Posted by MRWATO2U
something like this would work if it hinged open. you wouldn't be-able to just whip it off after painting...smudged paint = start again.
what i have seen before is a similar design as above and mentioned but the foam acted as a sponge, dipped in paint, and when hinged/wrapped around the object, applied the paint in required areas or the area that the sponge was cut to suit.
|
yer.....but hoping to keep manual labour in the use of the spray guns as its more efficient.
Might see if that sponge idea can be incorporated into the designs
maybe the PVC pipe could be cut in half the from top to bottom and then strong thin magnets could line the joints so after painting simply remove each half, replace steel join halves and start the next.
Even after removing the pipe the newly painted steel could be vigorously rotated to maximise drying time.