View Single Post
  #4  
Old 06-04-2007, 11:57 AM
Nails's Avatar
Nails Nails is offline
DCCD Donut Driver
Member
 
Join Date: Jul 2006
Location: NOR
Posts: 105
Thanks: 0
Thanked 0 Times in 0 Posts
Nails at standard level
Default

Quote:
Originally Posted by dan.r.s
installed a turbosmart dual stage, i get 1st stage boost hit the rocket switch and no 2nd stage it is identical to 1st. i have

------ power supply (cigg lighter)
------ earthed to rocket switch (ON)
coming off the OFF side of the switch i have earthed to the body.
Does this sound right guys?
is it possible my cigg power is not working? can someone suggest another power supply. (boost can be changed on 1st stage though)

if I had no power would i be able to change the boost ???
Yes but only manually and then you would only have one boost setting.

not to sure about the Turbosmart set up but if it has a solenoid it should go something like this.

The first stage should be preset to whatever psi you require for normal driving conditions. Switch in the off position

When in the second stage position [ switch in on position] activates the solenoid to open, giving the second preset boost pressure, lets say 18-20psi or whatever pressure you want for a bit of get up and go!.

With the wiring there should be only one power source to active the solenoid
to open.
In the on position power goes in to the switch then out of the switch in to the solenoid, out of the solenoid to ground or earth to comlpete the circuit when the rocket switch is activated therefore giving you the second stage boost setting.

Hope that makes sense.

Last edited by Nails; 06-04-2007 at 12:21 PM.
Reply With Quote