Quote:
Originally Posted by Kato
^^^ Correcto.
If I was putting them in the rear shelf, id have doubler plates put on for some added strength.
If the belts are going to rip out (something I have to take into consideration, since I weigh a bit more than the average bear) there would be no point putting a harness in.
Safety first, everything else second.
|
I would recommend against the rear parcel shelf placement since they will be too high and therefore at the wrong angle...and possibly will be rejected by a CAMS scrutineer. Recommended angle for the shoulder strap is 0 - 10 deg down from horizontal OF DRIVER'S SHOULDER. Acceptable is 0 - 40 deg