Wastegate Duty Cycle %
the VF34/p20 is running with a AVO 1 Bar actuator.
I havnt been able to test the car on boost until today(run in) - I have been giving it a bit of a flogging and noticed that my turbo seems slower/laggier to come onto boost than last time.
I did some logging with ecuexplorer - and I noticed that upon building boost - wastegate duty % goes to a maximum of 85%.
Subsequently - It does not go over 1 bar of boost, ever.
Shouldn't I read 100% (fully shut)???
(or is it the other way around?)
Is this a management problem or Do I need to wind the wastegate tighter?
Last edited by waxdass; 15-12-2008 at 09:22 PM.
|