Howdy, been on here a while now but haven't done a 'driveway' thread yet. Thought I may as well since there is some fairly decent work being done shortly.

Turbo & associated bits being installed in the next week or so, Verso tune being done in May when I come up to Perth for the ozFoz skid pan day...thinking 170-175kwatw or so but don't really know because no one else has done it before. Stock JDM Legacy's are getting around the 156kwatw from factory.

2002 Foz GT (manual)

ENGINE
* Tuned at 212hp/331nm @16psi with wastegate issues
* TD04HLA-19T twinscroll turbo
* AVO upgraded wastegate actuator for TD04HLA-19T - rated to 15psi
* JDM Legacy equal length headers & catless up-pipe
* 3” TBE system – Diff back in HiTech twin tip, rest is Xforce modded to suit turbo
* Silicon intake & SFB
* 02 WRX TMIC with GFB plumb back BOV
* Blitz EBC – not setup at the moment until car is tuned.
* STi Group N engine mounts
* STi Group N transmission mounts
* Twinscoll sump, dipstick etc.
* Walbro 500hp fuel pump
* K&N filter
* PMD blanking plate
* Resonatorectomy
* PVC in guard intake (used a 90mm>10mm coupler instead of flaring the end)

INTERIOR/ICE/ELECTRICS
* Upgraded alarm
* DLS 6.5" splits with Dynamat in doors
* Ghetto spec Kicker amp & Kenwood 12" Subwoofer
* Repainted interior stereo, aircon, cluster etc. to match body colour (silver metallic)
* Carbon fibre 60mm triple gauge pod with boost & narrowband A/F ratio
* JDM V6 STi RA front seats

EXTERIOR/SUSPENSION/DRIVELINE
* ozFoz (green) decal
* PMD Performance decal
* Dark tint (5%?)
* 22mm RSB with alloy mounts
* Strengthened OEM RSB mounts from 2003+ WRX's
* Debadged, with 'FORESTER' decals from doors adorning the rear over the 'SUBARU' (& holes), silver vinyl dots over 'Forester' badge holes.
* Blackened headlights
* Lowered on WRX suspension with (unknown) springs
* JDM Rear spoiler
* Stock 16” wheels repainted in satin black leaving silver lip
* Relocated rear number plate...moved up an inch (can post pic how if wanted)
* XT front calipers & rotors
* Short shifter

TO BE INSTALLED
* Phenolic gaskets
* 2007 Piggie WRX front bumper modified to fit... work in progress, see here: http://ozfoz.com/forum/viewtopic.php?f=23&t=11263

-----------------------------------------------------------------------------------------------------
When I got it in April 09:



Latest Pic (May 2010):