Quote:
Originally Posted by Jimmy S
Rolled guards and a degree or so of -ve camber should squeeze them in...
Personally wouldn't do it without coilovers though... +40 or higher without coilovers IMO...
|
Quote:
Originally Posted by mitchwnz
Answer:
Mate
WRX should take 18x 8 but with high off-set round 40+ to 45+ (factory WRX is about 55+)
These 18x 8.5 CR-Teks can be custom-made off-set 18+ to 40+ (reckon will rub the guards at 40+)
Also, some newer years of WRX is 5/114.3 not the normal 5/100 stud pattern, please specify it
|
Ive run 18x8 +35 enkeis 5x100 PCD with 0 camber at rear with coilovers and just rear gaurds rolled.
You should be able to run 18x8.5 +35 with a little bit of rear camber. or +40 with no camber imo...
Also wrx only run 5x100 PCD...
I dont think ur mate really has a clue..