Quote:
Originally Posted by norwest_rumbler
so you can run the boost gauge line off the comp housing or wastegate actuator line if you want - because that sees vaccuum as well.
what ebc or mbc are you using?
what is stock wastegate spring boost pressure? cause im guessing that is all you are using to control boost especially if spring pressure is about 0.4bar
|
EBC is PFC using factory EBC which is set to 1.3.kg/cm^2 (about 1.3 bar)
turbo is VF23, i dont know alot about the VF series.
i have now changed the location of the boost control feed to the inlet manifold and getting normal operation.
boost is peaking at 0.7 bar.
things to check next?