11-11-2010, 10:26 AM
|
|
Scoobie Noobie
Member
|
|
Join Date: Sep 2009
Location: BNE
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
The manual says:
Quote:
Height Adjustment
Height adjustment should be carried out only with the coilover base.
The spring seat should only be used to hold the spring in a captive
state.
The coilovers should have been fitted at the highest position (with
20mm of the damper thread inside the base) To adjust the height
once the coilovers are fitted, the top nut on the damper must be
loosened. Next loosen the lock nut on the coilover base and rotate
the entire coilover assembly, screwing it into the base to adjust the
height downwards. To adjust by equal amounts on each side it may
|
|