KiDo Racing Brake Kits are manufactured in Taiwan to a race proven design. Attention to detail and careful selection of materials ensure optimal performance under all conditions. Each kit is tailored to suit a specific model of car and comes complete with all hardware required to fit the kit. You will need to supply your own tools and DOT4 or better brake fluid. The manufacturing plant is ISO 9001 certified for quality assurance, and all Brake Kits purchased through KiDo in Australia are covered by a 6 month warranty on calipers and 3 months on rotors.
FITTING:
Most Rotors are a 2 piece design, being an T6061 aluminium hat (car specific) and a cast iron alloy rotor which is Kit specific. The rotors vary in thickness from 18mm solid (1 piece) for some rear brake kits with internal drum hand brakes, up to 32 mm ventilated for the larger front brake kits.
Rotors are available in the following sizes:
Rear: 285mm between 18 and 26mm thickness (depends on application)
302mm between 18 and 26mm thickness (depends on application)
325mm between 18 and 26mm thickness (depends on application)
NOTE: Rear rotors usually are 1 piece and incorporate a drum handbrake. For pricing on REAR kits, please ADD $250.00
Front: 285mm 23mm thickness (Mini 6 Pot Caliper requires 15” wheel)
Front: 300mm 24mm thickness (Mini 6 Pot Caliper requires 16” wheel)
Front: 325mm 25mm thickness (Mini 6 Pot Caliper requires 17” wheel)
Front: 330mm 32mm thickness (Mid 6 Pot, Big 6 Pot & 8 Pot Caliper requires 17” wheel)
Front: 356mm 32mm thickness (Mid 6 Pot, Big 6 Pot & 8 Pot Caliper requires 18” wheel)
Front: 380mm 32mm thickness ( Big 6 Pot & 8 Pot Caliper requires 19” wheel)
The Calipers are billet T6061 aluminium precision machined to tight tolerances. Calipers come in 5 sizes and some are available in different widths to suit different rotor thicknesses. These calipers accept AP racing style pads.
Sizes: 4 Pot (used for rear brakes, rotor sizes from 285 to 330mm)
Mini 6 Pot (front and rear kits, rotor sizes from 285 to 330mm)
Mid 6 Pot (front kits, rotor sizes from 330 to 356mm)
Big 6 Pot (front kits, rotor sizes from 330 to 380mm)
8 Pot (front kits, rotor sizes from 330 to 380mm)
For specific details of which kits are available for your vehicle please download our spreadsheet from
http://www.kido-racing.com.au/downlo...ion_2011v3.xls
Of course WRX's are covered!
COLOUR:
Calipers and Rotor Hats are painted in your choice of Red, Black or Silver as standard. Extra cost options include Anodizing in your choice of colour or Dupont Performance Coating in Red, Black, Silver or Yellow.
PRICING:
We have one price for each size kit. Pricing does NOT include freight so please check with us for shipping costs. Pickup is available from our warehouse by arrangement. We can provide freight with E-Go, shipping Depot to Depot or Depot to address. We use the Gisborne VIC. depot. If you prefer to arrange your own freight that is OK too.
Please see attached image for Perth-WRX prices. If you contact us with an enquiry or to place an order you MUST mention Perth-WRX to get these special prices.
All prices include GST and a Tax invoice will be issued.
CONTACT:
Bryce Letcher
KiDo Racing
Factory 2 / 18 McDougall Road,
Sunbury. VIC. 3429
Phone: 0422 337 392
Email:
sales@kido-racing.com.au
Web: kido-racing.com.au
6 Pot Midi Caliper
8 Pot Caliper / 2 Piece Slotted Rotors
Fully equipped JDM Legacy
Mini 6 Pot Caliper
Full Brake Kit
