Hi Guys, I am still having trouble with my engine not starting. I have cleaned the injectors put new viton orings on them and put them back in but she still won't fire. The injectors are definitely pulsing and delivering fuel, after a couple of cranks I can smell fuel in the tail pipe. I have taken out the plugs again and i have spark and they are wet with fuel. I have run a diagnostics on the ECU as per Rossco's instructions but no fault codes are coming up. just checked the resistance on the crankshaft and camshaft sensors and the resistance is not reading what it should. It says in my factory manual that the resistance of the crankshaft and camshaft should be 2,040+or-200 ohms But the crankshaft sensor is reading 1400 and the camshaft sensor is reading 1680 does this mean they are stuffed or what.

Oh and I just checked the cam timing and all the marks are where they should be. Help guys getting pretty frustrated here. Clive