Hi Guys,
First time to the forum for me great site with all the different feedback and that.
I was hoping that there is any members out ther in REX land could help me out with a bit of problem I have at the moment.[ High idling]

I have been doing a bit of major surgery to the car.
I,ve installed the following:

VF34 Turbo.
Large top mount intercooler.
Samco hoses all round.
Mandrel bent high flow headers and down pipe[heat wrapped].
3" turbo back exhaust.
Supersonic BOV.
K&N high flow filter.

After installing all the above I reset the ECU before firing her up.
She started first time but the idle was quit high 1800-2000 rmp and did,nt look like settling down.
I turned it off after it came up to temp and let it cool off a bit.Once it was cool I fired it back up and still the same, so i decided to take her for a spin.
Drove ok good trottle responce, good boost pressure 16-18psi all was well so I thought until I stopped[idle still high as before].

Came back home and put her in the garage to cool off again.

Did the following

Disconnected the air filter and pressurised the entire system to check for leaks on all hose connections 10psi, NO LEAKS.

Removed the MAF sensor checked and cleaned, OK.

Removed the IACV cleaned and checked operation by pulsing 12V across the terminals making sure that it was moving in and out, OK.

Reset the ECU again.
Started her back up again and still the same high idling.

So lads I,am in a bit of a spin at the moment not knowing which direction to take.
Any help would be great.Cheers.

Nails