ok first up... check the wires that come out of the back of the gearbox. go from the drivers side, jack the car up and start feeling around up there.

http://desmond.imageshack.us/Himg822...jpg&res=medium

http://desmond.imageshack.us/Himg820...jpg&res=medium

these from memory are two black wires which go to the engine back wiring loom.

http://desmond.imageshack.us/Himg193...jpg&res=medium

you will need to take the intercooler off to check to see if you have the plug. cut the plug and wire these up. now if your not sure which one is which.. it doesnt matter, because all that will happen is when you toggle foward on your switch your dccd will go the opposite direction. so just wire it up then solder it later when you know you have it right.

sorry for the shitty pics btw.. im really tired!!!

i cant remember where the dccd controller and handbrake hook up to but im pretty sure they were part of the main loom. sounds to me like you might already have the dccd controller wiring in there (because there are no plugs) which mean your in for a bit of fun.. ripping your interior apart! lol. im pretty sure my handbrake and dccd controller go throught the centre console. but im not 100%. if you want i can rip it apart on the weekend and find out where they goe. altho this would mean youd owe me a beer! lol.