Quote:
Originally Posted by dtrally
Is there any freeplay at the slave cylinder pushrod? If theres a hdraulic problem, ie; the fluid can't return or the pushrod/fork combination is wrong for some reason it could hold the clutch in the released position. Firstly, before you remove thew box again remove the slave cylinder. If the clutch still slips you have a fault internal. Chance you fitted the clutch plate in back to front maybe?
|
Checked there was no free play ect, tried a suggested still slipping, clutch plate seems to not be clamping with the pressure plate,
when I had it all together, when I pushed on the clutch it would release the pressure on the clutch plate, but when I released the clutch pedal the clutch plate was spinning not clamping properly...
But again with the slave removed it was doing the same...
Sent from my GT-I9210T using Tapatalk 2