Hi guys,
As of yesterday I've had some difficulties with my car. This code keeps re-appearing, but I've narrowed it down to something that I need some help with.
I've already replaced the MAC Boost Control Solenoid. The car has been reflashed by ASG quite some time ago. This measured 16 Ohms, which is exactly the same as the Old Solenoid that I thought was the problem - but changed it as a precautionary measure (new one only cost me $60)
From what I can ascertain from the electrical schematic; the Wastegate Solenoid is fed a constant 12V, and then presumably the Driver circuit in the
ECU internally controls the Duty Cycle by either closing or opening the circuit; dependent on other inputs (presumably manifold pressure).
I've noticed I have
continuity on the earth return from the Wastegate Solenoid, which I would have thought would be incorrect - so I need someone to confirm this (as I thought a closed circuit instance would have only been above a certain manifold pressure). The continuity expectedly disappears when I disconnect the
ECU from the harness.
Now I have also noticed that I have continuity on the 12V feed to the Wastegate Solenoid - and need to know (with the help of the schematic below), where exactly this 12V is fed from; as to me - it is fed directly from the Main Battery Relay, through the sensor, and then earthed through the
ECU. The only thing I don't quite understand is that the two wires (feed and return to the Wastegate Solenoid) are both contained in the same conduit, and seem to run in unison to the ECM.
Internet Mechanics need not apply. Please don't have any input unless you know what you're talking about.
Thanks guys.