Quote:
Originally Posted by RoughStilin
As sleeper said, undo engine mounts & jack the motor up. Getting the bolts out of the old sump is pretty easy. It's putting the 6 or so bolts that are slightly under the front of the crossmember. new bolts. Some patience is what's needed & a bit of blue tak in the socket head to manouver the bolt into place
|
Defiantly the hardest those
Ones fiddly as
As above just undo mounts and the cooler and lift I used a engine crane on mine
Just take ya time and it's easy enough
using the Perth-WRX mobile app