Here it is. Nearly all done. Literally just have to hook the handbrake warning light wire to the switch so it cuts off the DCCDpro. Russ cut me out a bespoke lever. Ive got the handle that came with the kit, but i do want something a bit more blingy. Ive put a return spring from a 5spd clutch fork/slave to keep it at rest. Although its not needed, it does make it feel a bit better. Switch is just a micro switch i had from an old project. It has NO and NC contacts so I used it in a way that when its at rest, its actually pressed. Then when you pull the lever, it allows it to go to rest. The normally closed (NC) contact will allow it to switch the right way. A bit like a brake light switch. The idea is that then it switchs as soon as the lever moves off rest, and doesnt matter how far the lever is pulled.
Even retain full use of the glove box. (because race car)