Or as above, cut a hole any shape that suits then get a piece of vacuum hose or similar, cut it length wise and stick it over the sharp edge, basically a large grommet.
You could use the original rod coming from the door mechanism or make a new rod, just find a way of attaching it to a separate hole/slot with the rod attached from underneath the carbon fibre or the side with a rubber cap on it so you can pull it to open the door.
__________________
Beaten up old 98 Gen 2 Liberty, 13.0, stock V3 STI running gear.
07 Transit motor home
69 VF & 70 VG Valiants needing full restoration
Yamaha Zooma 50cc rocket hopefully going with the Transit.
Last edited by Pimpreza; 23-03-2017 at 10:05 PM.
|