Hi ALL,
I thought I would share my findings below on the quick sketch I did. Incase anyone else has similar issues. For some reason my loom didn't have a 2 pin black connect to fit on the Subaru harness. I decided to trace from the sensor and to cut the wires from the connector, and installed a 2 pin plug and socket from Jaycar to ensure the loom fits.
All you really need is to splice the wire and solder a diode across the green wire to the white/red, which would cost under 50 cents. I preferred the loom due to being tidy.
Last edited by Ships; 22-11-2017 at 06:30 PM.
|