Few updates;
Parts at home awaiting fitment;
Blouch 1.5XTR 8cm
PSR UEL headers + up-pipe
PW FMIC w/ black core and piping
PW 72mm CAI
Perrin Inlet + SFB
Link G4 running the show
Last of the fuel system on the way, this now consists of;
ID1300x
Radium Engineering Fuel Rails
Turbosmart FPR1200
Walbro 460 in tank
Raceworks 2.8L Surge with 2 x 460's (second pump boost switched via Hobbs)
-6 PTFE feed and return
Will be doing most of the installation myself with some assistance for fueling, then towed to Justin @ BYE for a tuna.
Should see some decent figures with plenty of fuel and airflow. Will be running dedicated e85 (fingers crossed they keep a supply here)
Few other bits;
12 pin Deutsch used for going through the firewall for gauges - easy to remove if engine has to come out..
V1 and gauges installed;
Subtle solutions gauge bezel awaiting paint and holes for my EGT gauge and billet automotive switches;
KAP Industries bracket fitted, very pleased, perfect fitment thanks Russ;
Made a start on the sound system;
Pioneer AVH-X5800DAB
Apline PDX-5
Focal PSF165F up front
12AWG speaker cable
Boston Dynamics 12"sub
Amp mounted under passenger seat - blue carpet will be removed, not a very good match unfortunately;
Hobbs switch for 3rd fuel pump;
Will be fitting the parts in the next few weeks, stay tuned for updates and results
