A little update..
Car is now fully undersealed and painted so time for reassambly.
Although I needed to tackle the fuel system whilst the fuel tank was off the car.
I wanted to do things a little different this time round.
Rather than run rubber fuel hose through the car I decided to use the factory hard lines to eliminate the constant fuel smell in the car.
The factory feed line is not big enough on it's own for my fuel requirements so I decided to get a little creative.
As I no longer need the breather line this can now be used as a return line and I have combined the factory feed and return lines and now*have two 8mm (OD) feed lines.
Just had to cut the hard lines to allow for AN06 fittings to be used from the fuel filter forwards.
All in all a pretty neat solution.
Will look great once the boot is painted and all the fittings hoses replaced with new ones.