Hey guys,
Took the time on the weekend to add the STi logo on my STi and thought I would share for the other MY08+ owners who miss out on it!

I first found this article 2008 Subaru WRX STi - DIY Intercooler Logo and began the hunt for a stencil....

Found this website with vinyl stencils. The one I got stuck down great and left really nice clean edges.

Intercooler and Grill Stencils (branded)

Anyway...finish product ended up as below!

Edit: Just FYI...I used "Real Red" VHT High Temperature Caliper Paint and applied 2 light coats followed by a slightly heavier final coat. 10 minutes between each coat and then left for 2 hours before pulling off the stencil.


Hope someone else finds this useful!
Drew

Attached Thumbnails

 

Nice work...

__________________
MY06 STi

Not bad. Good for an extra 10kw easy.

__________________
1989 Legacy GT --> 2001 GD WRX --> 1999 GF8 WRX --> 2001 GD WRX

thats cool man...i saw this on nasioc...wonder why subaru stopped doing that

__________________
hello my name is tommy
i don't have a Subaru

10? Easy 20!

Stencil paint decreases TMIC efficiency?

__________________
[COLOR=Black]Liberty GT Spec B tuned 240 HP & 372 Nm at the hubs.[/COLOR] "Instead of banning high performance cars - ban low performance drivers"

Since my STI didn't have it either ... Been there... done that... Also have the logo specs for creating your own stencil.

WRX DIY Guides

BTW - It gave my STI 42kw more power.

__________________
[SIGPIC][/SIGPIC]

My flame suit is on. Give it your best biatch.


[COLOR="Red"]My STI's carbon emissions are offset by killing puppies.[/COLOR]

Need to be careful as they can look quite clumsy.

__________________
MY04 WRX
3" TBE | STI Top Mount | 3 Port | Walbro | Tuned to 155@wkw 210HP |

Just remembered I forgot to post that I have a can of the red spare if anyone doesn't want to fork out for one. Might as well save the $20

Or you could order some new Brembo decals and paint your calipers!