|
|
LinkBack | Thread Tools | Display Modes |
#611
|
||||
|
||||
Quote:
I did not use Alliance, I will await the results of repair and paint before commenting further.
__________________
I am only an asshole on the internet :) [SIGPIC][/SIGPIC] |
#612
|
|||
|
|||
BN01, this is where you purchased your rims from? What was the turnaround time after payment?
Quote:
Cheers
__________________
MY06 STi |
#613
|
||||
|
||||
Sorry if this sounds like a Noob question but what exactly is the 'offset' of a wheel and how does it effect how it fits?
I know the standard offset for my MY07 is 55 so im guessing when i purchase rims i have to get as close to that as possible but if i went to say 43 or so is that still ok? Thanks |
#614
|
||||
|
||||
I'ce always wanted to know that same answer.
The PCD Offset or something like that |
#615
|
||||
|
||||
PCD (Pitch Circle Diameter) is an imaginary circle through the wheel studs that tells you the distance between them, on a GC8 & GDA its 5x100 or 5 studs in a 100mm diameter circle, on the 05-07 STI its 5x114.3 or 5 studs in a 114.3mm dia circle
Offset describes where the the rim contacts the hub & how far it is from the centre line of the rim. this will effect things like its ability to clear bigger brakes (03 GD for example wrx is +48 for 4 pots or +53 for Brembos), ability to clear your struts, clear the bodywork etc clear as mud ?
__________________
MY93 Impreza GX 1.8L, 0hp, 0nm |
#616
|
||||
|
||||
also note that the offsets i listed above are for a 17" rim, the width and diameter of the rim will also change the offset required.
There is a thread on nasioc showing a whole bunch of rims, there sizes, weights & wether they clear brembos... but i cbf findign it atm
__________________
MY93 Impreza GX 1.8L, 0hp, 0nm |
#617
|
||||
|
||||
Thanks jEstEr
I now understand what the PCD is on the wheels. Ii thought the Offset was also to do with the PCD but its not. |
#618
|
||||
|
||||
Also remember that different styles of rims will require different offsets. Ie. A Rays rim with +55 offset and a Tempe rim with +55 offset will be completely different and one may not fit your car even though it is +55. The supplier of your rims can check the fit with the factory and confirm what will and will not fit.
__________________
TD06 - Oink. |
#619
|
||||
|
||||
tj how do u manage to break everything u drive
|
#620
|
||||
|
||||
Not really. Two 17x8" wheels with say a +55 offset should be the same. Whether or not each wheel design will clear Brembo calipers is a completely different matter. The design of the wheel spokes aswell as wheel offset determines if there is enough clearance to clear bigger calipers.
Quote:
|
Tags |
cr kai, fo real, post, rim job, rims, tino is a midget |
|
|