Automotive jacks and tools
Hi Guys,
We are currently supplying some workshop equipment as well to the Eastern States. We are also retailing these Arcan XL35 3.5Ton Low lift floor Jacks here in Perth. RRP A$350, P.WRX$250 [IMG]http://arcanusa.com/Images/Lifting/XL35.jpg[/IMG] 3.5 TON CAPACITY PROFESSIONAL LOW LIFT JACK[LIST][*]Thick frame side plates and reinforced lift arm[*]Low lift height and profile frame[*]Dual pump pistons[*]Bypass and overload valves[*]Ball bearing mounted rear swivel caster wheels[*]2 piece handle for easy storage[*]Quick lock feature[*]Saddle pad[/LIST]For more info, please go to [url=http://arcanusa.com/lifting.html]Arcan Professional Tools[/url] Regards, Mao/ Evo R |
Hi Mao,
Can you supply other products in their range? I've been after a decent quality jack for the garage for a while now. Was thinking something like the ALJ3T, as it looks quite sturdy. Or would you recommend the one you have listed over it? Cheers, Jeremy |
Will check that one out for ya and send you a PM.
Regards. |
Ill take one Mao. The one I have at home is not in the best condition. I think the seals have gone. Let me know when I can come and collect.
Hope your well mate |
How much does it weigh and how low is from the ground??
cheers Ian |
I couldnt be better. Be flying off tmr in the evening YAY!!!, so any time tmr before 4pm will be fine.
[QUOTE=RoughStilin;592721]Ill take one Mao. The one I have at home is not in the best condition. I think the seals have gone. Let me know when I can come and collect. Hope your well mate[/QUOTE] Sorry guys, both jacks on stock has been taken, will be bringing more in in a couple of weeks. Weight is pretty heavy as it is a workshop grade jack. You can find the info from here: [url]http://arcanusa.com/lifting.html[/url] Hint: Jacks are exactly the same as the one below. [IMG]http://buy1.snapon.com/catalog/OBJECTS/62500/62495.JPG[/IMG] [QUOTE=SStoked;592722]How much does it weigh and how low is from the ground?? cheers Ian[/QUOTE] |
[QUOTE=SStoked;592722]How much does it weigh and how low is from the ground??
cheers Ian[/QUOTE] Taken from site: 3.5 TON CAPACITY PROFESSIONAL LOW LIFT JACK Thick frame side plates and reinforced lift arm Low lift height and profile frame Dual pump pistons Bypass and overload valves Ball bearing mounted rear swivel caster wheels 2 piece handle for easy storage Quick lock feature Saddle pad XL35 Specifications Low Lift Height 3-1/2" High Lift Height 21-1/4" Overall Length 27-3/4" Overall Width 14-1/8" Overall Height at Pump 6-3/16" Handle Length 50" Saddle Diameter 4-5/8" Net Weight 99 Lbs. |
We are now your local source for Mitutoyo Precision Tools. These are sold as Snap-on equipment in Japan and we have access to the whole range from micrometers, piston bore measurements to mining tools.
Please go to [url=http://www.mitutoyo.co.jp/eng/index.html]MITUTOYO[/url] for more information If you want a quality tools with precise accuracy, these are the best in the world. Below Mitutoya Digital Vernier calipers with Absolute technology RRP -$280 P.WRX-$230 [IMG]http://img705.imageshack.us/img705/3060/dsc01032fv.jpg[/IMG] [IMG]http://img508.imageshack.us/img508/6470/dsc01034u.jpg[/IMG] |
We are negotiating on the ALJ3T at the moment and will bring them in shortly.
Regards, Mao [QUOTE=Jezza;592715]Hi Mao, Can you supply other products in their range? I've been after a decent quality jack for the garage for a while now. Was thinking something like the ALJ3T, as it looks quite sturdy. Or would you recommend the one you have listed over it? Cheers, Jeremy[/QUOTE] |
ADR Compliant Arcan Aluminium 2T jack currently on the nego list before next shipment. This is a very low jack that will be very useful for lowered racing cars and is also light weight as it is made of full aircraft alumimium:
[IMG]http://img89.imageshack.us/img89/7592/gsgv.jpg[/IMG] [IMG]http://img828.imageshack.us/img828/5690/ppalj2t1.jpg[/IMG] [IMG]http://img811.imageshack.us/img811/8585/imagesjack1.jpg[/IMG] |
How are these jacks going Mao?
|
Yeah keen to know also!
|
Guys I got a small order of 20 jacks on the way. Will PM you guys when they arrive.
Thanks. |
price?
|
Rrp$450.
P.wrx$280 [quote=jester?;611349]price?[/quote] |
Hey Mao just wondering if you have these in stock?
|
did these ever arrive ?
|
I have one of these jacks (got it elsewhere) and they are good quality and a great price given they are a low profile jack. Recently had a cracked tile in my garage (didn't know till after the torrential downpours a while back) and my jack ended up sitting in a puddle of water for some time. Assumed it would be pretty boned but just cleaned up the surface rust on the wheels and it was fine. Works perfectly and hasn't missed a beat so great value for money given Bluepoint and other name brands that are equivalent to this sell in the $500 region.
|
Keen on one of the Aluminium 2T jacks.
|
Hi Guys,
We brought these in initially as a direct supply to a tooling company over east and kept some in stock in Perth but they always sold out fast. Seems there is an interest in these jacks and will see if the manufacturer allows smaller qty orders. Will update soon. |
Mao, I am keen for one still. pm when they come in.
|
Mee too.
|
Me three!
|
Ok guys,
Sorry for the late reply. Just back in Perth. Have managed to negotiate a small batch of the lightweight racing jacks to be sent to Perth. Will organise for them to come in hopefully before Christmas as these have to be sent by sea. because of the hydraulic oil content from factory. Will update with pics of the newer and lighter 1.5T model this week. Cheers. |
Keen as well
|
mao I would be keen for one too. Pm when they come in thanks
|
Any news on this one? I'm about to order one on Ebay but would rather purchase from you.
|
Mao. I am quite disappointed with this. I have waited a year for you too get these jacks in. Is this going ahead or not? Otherwise I will get it elsewhere.
|
Guys, Chong: Sorry for the late reply as my workload has been huge during the last 2 months with all the festive holidays, plus catching up with work.
Our online retailer over East has complained about us selling on here and we are forced to bring in another design, so there is no conflict of interest. ETA is mid march at this moment if you can wait. We are currently waiting for Aust standards approval AS.NZS 2615:2004 and are unable to sell this other model until the approval comes through. We have dealt with this item on at trade level and it has been a mission on my part to try to keep the trade customer happy and bring an added value item to you guys here at the same time. Cheers. |
need more aluminium jacks...
soon dammit! |
[QUOTE=mao;736648]Guys, Chong: Sorry for the late reply as my workload has been huge during the last 2 months with all the festive holidays, plus catching up with work.
Our online retailer over East has complained about us selling on here and we are forced to bring in another design, so there is no conflict of interest. ETA is mid march at this moment if you can wait. We are currently waiting for Aust standards approval AS.NZS 2615:2004 and are unable to sell this other model until the approval comes through. We have dealt with this item on at trade level and it has been a mission on my part to try to keep the trade customer happy and bring an added value item to you guys here at the same time. Cheers.[/QUOTE] Ok Mao, I will see how I go. PM me when they arrive. Thanks |
[QUOTE=mao;736648]Guys, Chong: Sorry for the late reply as my workload has been huge during the last 2 months with all the festive holidays, plus catching up with work.
Our online retailer over East has complained about us selling on here and we are forced to bring in another design, so there is no conflict of interest. ETA is mid march at this moment if you can wait. We are currently waiting for Aust standards approval AS.NZS 2615:2004 and are unable to sell this other model until the approval comes through. We have dealt with this item on at trade level and it has been a mission on my part to try to keep the trade customer happy and bring an added value item to you guys here at the same time. Cheers.[/QUOTE] Hi Mao. Have you got an update on this? |
Possibly keen for one of these jacks too!
|
Not forgotten. Waiting for AS to come through
|
Eta?
|
How low will these ones go, I don't need 3.5 tonne etc I need something that will get under my car.
|
Guys, as much as I want my 100 jacks to be cleared for sale, I am subject to their approval and waiting time which is out of my control. Please wait for my updates.
I am only bringing one model of low jack now which is 2T and awaiting approval, as each new line will cost more than 20k for stock, freight and approval. No intentions of bringing in others ATM until this line has cleared. |
Do you sell the jack stands aswell? How much?
|
Hey Russ,
How are u? No plans for the jack stands as yet. Depends on how thes AS approval on the jacks go at this moment. Will recommend the Blue Point ones from Snap on as they are pretty sturdy. [QUOTE=RUSSGT;744309]Do you sell the jack stands aswell? How much?[/QUOTE] |
Thanks!
|
All times are GMT +8. The time now is 01:49 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO