X-Force and Varex muffler and exhaust systems
 

Hi. P.WRX,

Evolution R is now able to provide you with X-Force and Varex exhaust systems for your car. I will update with more pics and info shortly.

Subaru GC8 and GDA, GDB Impreza and STi:
X-Force Full exhaust system fitted turbo-back -- $1200
X-Force Full exhaust system fitted turbo-back
including Varex muffler -- $1350

Subaru Forester SF, SG:
X-Force Full exhaust system fitted turbo-back -- $1200
X-Force Full exhaust system fitted turbo-back
including Varex muffler -- $1350

Subaru Impreza WRX/STi MY07-MY12:
X-Force Full exhaust system fitted turbo-back (twin outlet) -- $1300

Subaru Forester SH:
X-Force Full exhaust system fitted turbo-back -- $1200

Subaru Legacy/Liberty BL:
X-Force Full exhaust system fitted turbo-back (twin outlet) --$1300

Varex 3" Cannon Muffler --- P.WRX $360 or $520 installed.
Varex Oval 3" inlet and 3" Outlet --- P.WRX $390 or $550 installed.
Varex Oval 3" inlet with twin tips -- P.WRX $390 part only or $550 installed.

Varex Oval 3" inlet with Single outlet tip:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/Untitled-518.jpg[/IMG]

Varex Oval 3" inlet with Twin Outlet Tips:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/Untitled-1710.jpg[/IMG]
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/Untitled-899.jpg[/IMG]

Below is a pic of the 3" Varex Cannon muffler -- part only P.WRX $360.
[IMG]http://img846.imageshack.us/img846/4984/dsc02157d.jpg[/IMG]

Parts that come with it include a remote control, wiring harness and control box:
[IMG]http://img809.imageshack.us/img809/5706/dsc02156d.jpg[/IMG]

Below is close up on external motor which controls the exhaust plate via remote control:
[IMG]http://img710.imageshack.us/img710/9854/dsc02158c.jpg[/IMG]

Cross-sectional pic of exhaust plate from both front and rear of muffler:
[IMG]http://img560.imageshack.us/img560/7341/dsc02150jq.jpg[/IMG]
[IMG]http://img263.imageshack.us/img263/6606/dsc02152bq.jpg[/IMG]

Hi Mao you have got me pretty excited I nearly ordered a varex from e bay have you got an oval muffler 3 inch in and out thanks I would rather keep my business in WA I got quoted excessively more from another suppler in perth than the e bay price please pm me with the price ect

Thanks

Thank you for the enquiry.

Prices for Varex oval mufflers are $385 including for P.WRX members.

PM sent.

[QUOTE=Rob83;642846]Hi Mao you have got me pretty excited I nearly ordered a varex from e bay have you got an oval muffler 3 inch in and out thanks I would rather keep my business in WA I got quoted excessively more from another suppler in perth than the e bay price please pm me with the price ect

Thanks[/QUOTE]

Hey Mao, What would be the approximate install cost ontop of the purchase price for a varex oval muffler?

Anything for MY10 GT Lib wagon?

chasing a exuast for a 03 wrx turbo back exaust !

Sorry guys, drowning in work all weekend and today as well. Will update prices tmr. Apologies.

[QUOTE=BXT;645513]Anything for MY10 GT Lib wagon?[/QUOTE]

Anything????

Hi, how are you? The install cost on top of the purchase price for the Varex oval muffler is $120. The oval mufler has twin tips or single. Single tip Varex oval mufflers are slightly cheaper in price.

[QUOTE=Master D;645430]Hey Mao, What would be the approximate install cost ontop of the purchase price for a varex oval muffler?[/QUOTE]

Hi, The 03 wrx turbo back exhaust in the cannon style --- $1200 in stock.
[QUOTE=Alexander32;645545]chasing a exuast for a 03 wrx turbo back exaust ![/QUOTE]

There is nothing listed in my catalogues but have sent an enquiry this morning and I am still waiting for a reply from X-force NSW. Will definitely update you on this.
[QUOTE=BXT;646227]Anything????[/QUOTE]

Cheers mao.

hi mao do you have x force headers un equal length ones for a 06 wrx 2.5 litre and how much are they worth doing ill be getting a tune soon from your place hopefully

Hi mate, X-force has released a turbo-back for the MY10 GT Lib Wagon with twin muffler outlets, showing availability as well. Price is $1300.

[QUOTE=BXT;645513]Anything for MY10 GT Lib wagon?[/QUOTE]


Hi Rob, X-force does only the tuned length which is 4-2-1. The X-force extractors, which include the up-pipe, are priced at $480.

[QUOTE=Rob83;646289]hi mao do you have x force headers un equal length ones for a 06 wrx 2.5 litre and how much are they worth doing ill be getting a tune soon from your place hopefully[/QUOTE]

[QUOTE=mao;646482]Hi mate, X-force has released a turbo-back for the MY10 GT Lib Wagon with twin muffler outlets, showing availability as well. Price is $1300.[/QUOTE]

Thanks Mao, just checked their website but can't see anything. Is that price for stainless or mild steel? Does it have a cat?

Is it possible to get some pics even if it's not up on their website yet? I'm keen to see how they've done the dump pipe off the back of the turbo. The Invidia system I've been looking at has basically a flat plate in front of where the waste gate gases come out of the turbo which makes the dump pipe almost useless.

See the first pic:
[url=http://www.invidia-usa.com/Products.aspx?ProductID=254]Invidia USA.[/url]

At worst the collector should look like the other traditional dump collectors from other turbo subarus or have a splitter at best.

Thanks again Mao.

No probs. As it is a new system with no listing yet on the website and catalogues, I will proceed to get some pics for this system with further details and post them up on Friday.

I believe it comes with the dump pipe you want and high flow cat, but I have to confirm this with the pics on Friday.

Cheers.

[QUOTE=BXT;646582]Thanks Mao, just checked their website but can't see anything. Is that price for stainless or mild steel? Does it have a cat?

Is it possible to get some pics even if it's not up on their website yet? I'm keen to see how they've done the dump pipe off the back of the turbo. The Invidia system I've been looking at has basically a flat plate in front of where the waste gate gases come out of the turbo which makes the dump pipe almost useless.

See the first pic:
[URL="http://www.invidia-usa.com/Products.aspx?ProductID=254"]Invidia USA.[/URL]

At worst the collector should look like the other traditional dump collectors from other turbo subarus or have a splitter at best.

Thanks again Mao.[/QUOTE]

BXT - PM sent

For all you guys with an existing X-Force Cannon muffler system, the X-force does a Varex bolt on in place of the old cannon muffler. So installation will be bolt on, with new sticks welded and wiring to be done.

Hey Mao,

Can you do (and what would the pricing be) for catback centre pipe and Y pipe to replace the factory piping on a 2008 Foz XT? Basically what MRT are selling here... ([url]https://www.mrtperformance.com.au/product-detail?part_number=SUWE034SJS&barcode=&brand=MRT&return_url=https%3A%2F%2Fwww.mrtperformance.com.au%2Fvehicle-search-results[/url])

I already have Magnaflow mufflers that were a bolt on to the stock setup.

Cheers, Brad.

Thanks for the enquiry.

X-Force systems are manufactured as a catback and turbo back. The centre replacement and Y-pipe sections can be bought separately, but was not manufactured as a diff-back match to the factory system, so some adjustmens and welding may be necessary. Price --- $650

BXT --- Attached are the pic of the X-Force system. Cat is included and also the dump is the open type which allows for more wastegate gas flow.

Catback:
[IMG]http://img705.imageshack.us/img705/4661/dsc02376eu.jpg[/IMG]

Dump/Front Pipe with high-flow cat included:
[IMG]http://img408.imageshack.us/img408/770/dsc02378p.jpg[/IMG]


[QUOTE=BXT;646582]Thanks Mao, just checked their website but can't see anything. Is that price for stainless or mild steel? Does it have a cat?

Is it possible to get some pics even if it's not up on their website yet? I'm keen to see how they've done the dump pipe off the back of the turbo. The Invidia system I've been looking at has basically a flat plate in front of where the waste gate gases come out of the turbo which makes the dump pipe almost useless.

See the first pic:
[URL="http://www.invidia-usa.com/Products.aspx?ProductID=254"]Invidia USA.[/URL]

At worst the collector should look like the other traditional dump collectors from other turbo subarus or have a splitter at best.

Thanks again Mao.[/QUOTE]

Thanks for the pics mao, however they are clearly not for MY10+ GT Liberty. That dump pipe is from previous models where the turbo is in the usual position. MY10+ GTs have the turbo mounted under the engine and therefore have a totally different dump pipe hence the link I originally posted.

XForce going onto my car in 2 weeks, finally, should sound great! Fingers crossed!

The pics were fwded to me from X-Force today. There are 2 dump/front pipes listed. I will get u actual pics tmr.

[QUOTE=BXT;647632]Thanks for the pics mao, however they are clearly not for MY10+ GT Liberty. That dump pipe is from previous models where the turbo is in the usual position. MY10+ GTs have the turbo mounted under the engine and therefore have a totally different dump pipe hence the link I originally posted.[/QUOTE]

BXT: Hi again, below are the actual pics I took today of the AUDM Liberty MY10+ front/dump pipe. The wastegate gases are not blocked in this application and there is a sneak view of the high flow cat in the pic as well.

[IMG]http://img525.imageshack.us/img525/9200/my10.jpg[/IMG]
[IMG]http://img594.imageshack.us/img594/692/my102.jpg[/IMG]

Think the pic didnt load mao - I cant see anything there.

yup was off doing Yas's wagon a/c regas. just finished, so loaded the pics again.

Mao, can I go look at the system in the flesh?
Where are you located?

Sorry boss, this exhaust was the first one shipped by X-force for their online customer and has already left for bunbury.

Becos the system is so new and it is not a system we will keep in stock at this stage as there are very few my10 libertys.

When will you have one in stock?

PM sent boss.

BXT: 2010+ Liberty X-Force Full system here at Evolution R in the flesh.

Edit: Will also post pics up shortly.

[QUOTE=BXT;647921]When will you have one in stock?[/QUOTE]

Where is your business located mao?

Unit 3, number 9, capel ct. Bentley. WA 6102


[QUOTE=BXT;649367]Where is your business located mao?[/QUOTE]

hey mao
how much for Angle Out Cannon muffler: 4.5" tip,7" barrel, muffler sitting in slight angle
X-Force Full exhaust system fitted turbo-back??

I would assume that yours is a MY06/07 WRX from your pic.

Both X-Force angle-out systems:
X-force turbo back --- $1200 fitted.
X-Force varex system turbo back -- $1350 fitted.

yer it is srry i should of but that in there so $1200 fitted sounds very nice to me i will get sum cash saved up and ill cum see u guys give or take a few months lol

thx mao

Just did a Varex muffler install on dotdot's GC8. Results were awesome. Full flow when Varex's muffler plate was open and factory quiet when muffler plate was closed. All this happened with the simple operation via a remote controller.

Below are pics of the Varex full stainless muffler installed onto his existing 3" system.

Varex open (boxer rumble):
[IMG]http://img593.imageshack.us/img593/1635/dsc02388f.jpg[/IMG]

Varex closed (factory quiet)
[IMG]http://img252.imageshack.us/img252/9379/dsc02389tm.jpg[/IMG]

Varex tip:
[IMG]http://img826.imageshack.us/img826/2087/dsc02391l.jpg[/IMG]

Proper flange fitment:
[IMG]http://img809.imageshack.us/img809/5529/dsc02395je.jpg[/IMG]

Finished product angled out (sorry for the poor pic):
[IMG]http://img710.imageshack.us/img710/8682/dsc02387b.jpg[/IMG]

Below is another Varex muffler we fitted on today.

With the simple operation of a remote we can vary the exhaust noise on the Rex.
[IMG]http://img811.imageshack.us/img811/8392/dsc02493d.jpg[/IMG]

Fully open (full flow and loud boxer noise):
[IMG]http://img802.imageshack.us/img802/4866/dsc02490n.jpg[/IMG]

Half open (less flow with mild boxer noise):
[IMG]http://img814.imageshack.us/img814/9518/dsc02491g.jpg[/IMG]

90% closed (low factory idle noise):
[IMG]http://img705.imageshack.us/img705/1729/dsc02492j.jpg[/IMG]

Varex muffler on the Rex (Don't mind the HKS exhaust sticker!!):
[IMG]http://img525.imageshack.us/img525/3452/dsc02494g.jpg[/IMG]
[IMG]http://img80.imageshack.us/img80/2900/dsc02495k.jpg[/IMG]

My turn tomorrow! Bring it on!!!!

BXT -- Below are the requested pics. Rear of the MY10+ Legacy/Liberty Wagon is longer, as such, the exhaust tip is extended.

Full X-Force turbo-back exhaust pics:
[IMG]http://img600.imageshack.us/img600/7376/dsc02448o.jpg[/IMG]

Muffler with extend tip pics:
[IMG]http://img542.imageshack.us/img542/1237/dsc02451c.jpg[/IMG]
[IMG]http://img11.imageshack.us/img11/2133/dsc02453ws.jpg[/IMG]

Below is a the Varex Full Turbo-back stainless steel exhaust installed in a GD WRX. This system is a 3" high flow system, where the exhaust noise can be adjusted via a remote control.

This full stainless system fits very nicely and is cleverly designed in 5 sections - Turbo front pipe, high flow cat, centre pipe with resonator, diff-back pipe and Varex muffler.

Stainless Turbo Front Pipe which caters for both wastegate and exhaust flow, this pipe also includes a flexible joint:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03089-1.jpg[/IMG]
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03088-1.jpg[/IMG]

Stainless High Flow Cat:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03087-1.jpg[/IMG]

Stainless steel Centre Pipe with resonator:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03092-1.jpg[/IMG]

Stainless Steel Diff-back pipe:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03090-1.jpg[/IMG]

Rear Stainless Varex muffler:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03082-1.jpg[/IMG]

Connections---

Front-pipe to high-flow cat to centre pipe:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03092-1.jpg[/IMG]

High-Flow Cat to Centre pipe (includes resonator) to Diff-back pipe:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03091-1.jpg[/IMG]

Centre pipe to diff-back to Varex muffler:
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03094-1.jpg[/IMG]

Full Stainless Steel Turbo-back Varex Exhaust System installed :
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03083-1.jpg[/IMG]
[IMG]http://i1111.photobucket.com/albums/h468/maoevor/DSC03085-1.jpg[/IMG]

Mao are the Varex 3 inch straight through when fully open?