|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Gbox and engine !
Hey i just got a new clutch put in and took advantage of it a few times...1st now has a whine to it (Some bits of metal were pulled out when g box oil changed) not so much when accelerate but when you back off...
I have also had the problem of white smoke coming out of the car when its been cold (Only done it twice tho) starting to think maybe its the v/stem seals which seems to be a pain in the a** to change I guess my question is, MY01 front cuts available in Perth ? Is this option cheaper in the long run if i nab up a g box and motor at the same time? Whats a pretty reasonable place to get front cuts etc etc ? Thanks Shauno
__________________
*******Veale Auto Parts******* ******Midland - Farrel RD****** |
#2
|
||||
|
||||
give darren at jap wholesale a buzz...
9302 3519 www.japanesewholesale.com.au i find them to be the best guys to deal with in perth |
#3
|
|||
|
|||
Shauno, go an 02sti front cut... ej207
|
#4
|
||||
|
||||
dont worry about a little white smoke when its cold. Its probably just a little condensation burning off inside the exhaust as the engine warms up. Does your car uses excessive amounts of oil?
As for the gearbox... 6MT conversion FTW!
__________________
RS Liberty - Because WRX's are only good for parts... |
#5
|
||||
|
||||
I'm going for stock replacements as the wallet doesn't allow for EJ207 or 6MT
White smoke has been happening on a few cruises, and when i have gone to fill up on fuel at which time its surely not still cold? It has used a bit of oil in the past (Due to rear main leaking heavily) But that has been fixed since. My mechanic has said either V Stem Seals or Turbo, but they need to look at the car to know for 100%.
__________________
*******Veale Auto Parts******* ******Midland - Farrel RD****** |
Tags |
engine, gbox |
|
|