Perth-WRX.com  

Go Back   Perth-WRX.com > General WRXing > General Subaru Discussion
Register Diddy Kart ArticlesAll AlbumsBlogs FAQ Community Calendar Today's Posts Search


Welcome to Perth-WRX, click here to register!

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 22-03-2007, 09:47 AM
NEAT 04''s Avatar
WRX Hi Five Club
Member
 
Join Date: Aug 2006
Location: East Perth
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
NEAT 04' at standard level
Default cold start issue?

over the last weeks i hav noticed that on cold start, wat sounds like a big end rattle has bin occuring. i havnt modded the car since i bought it. i asked the guys at subaru and they said that on cold starts the oil pump is a bit laisy and is very common with these models ... not sure bought that.
i then took it to seans to get an exhaust fitted he says its definately big end nock!!!
it started with a litle rattle and now goes for about 2seconds. but only on cold starts...
so i havn't put the exhaust on for warranty reasons. anyone got any thoughts on this matter.....????

i hav booked it in at subaru

thanks,
pawel
__________________
S14 Series II
Bolt Ons
Power FC

263 hub hp
Reply With Quote
  #2  
Old 22-03-2007, 09:49 AM
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Jul 2002
Location: Australia
Posts: 6,766
Blog Entries: 6
Thanks: 31
Thanked 48 Times in 34 Posts
BALISTC knows their stuff
Default

Quote:
Originally Posted by NEAT 04'
i asked the guys at subaru and they said that on cold starts the oil pump is a bit laisy and is very common with these models ... not sure bought that.
I call bullshit on that.

Definitely get it checked out, and if its a big end knock, get Subaru to sort it out for ya under warranty!
Reply With Quote
  #3  
Old 22-03-2007, 10:04 AM
NEAT 04''s Avatar
WRX Hi Five Club
Member
 
Join Date: Aug 2006
Location: East Perth
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
NEAT 04' at standard level
Default

Quote:
Originally Posted by BALISTC
I call bullshit on that.

Definitely get it checked out, and if its a big end knock, get Subaru to sort it out for ya under warranty!
oh for sure. i thought it was a bit suss. but that would mean rebuild if not fresh motor... right?
__________________
S14 Series II
Bolt Ons
Power FC

263 hub hp
Reply With Quote
  #4  
Old 22-03-2007, 10:22 AM
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Jul 2002
Location: Australia
Posts: 6,766
Blog Entries: 6
Thanks: 31
Thanked 48 Times in 34 Posts
BALISTC knows their stuff
Default

Correct, if they warrant the claim and it IS definitely a big end bearing.
Reply With Quote
  #5  
Old 22-03-2007, 10:26 AM
NEAT 04''s Avatar
WRX Hi Five Club
Member
 
Join Date: Aug 2006
Location: East Perth
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
NEAT 04' at standard level
Default

yeh well i havnt touched the car modifying wise, all ive done is change the globes, and my mate works there and he can vouch for that. so i dont see the problem with them fixing it.
moohaha. well thanks for ur help mate.
__________________
S14 Series II
Bolt Ons
Power FC

263 hub hp
Reply With Quote
  #6  
Old 22-03-2007, 06:21 PM
Potty Training Scoobie Noobie
Member
 
Join Date: Jul 2005
Location: Perth
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
rextum at standard level
Default

My advice is to get the guys at RMS to have a look, they seem to know of a common problem with these that sounds like a big end knock but is actually something else that costs far far less to fix.
Otherwise go for warranty and good luck.
Reply With Quote
  #7  
Old 22-03-2007, 08:35 PM
Mister Two's Avatar
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Mar 2006
Location: Surface of the Sun
Posts: 4,042
Thanks: 5
Thanked 8 Times in 8 Posts
Mister Two at standard level
Default

Could be a collapsed engine mount. Pretty rare, but sounds just like big end knocking.
__________________
RS Liberty - Because WRX's are only good for parts...
Reply With Quote
  #8  
Old 22-03-2007, 08:45 PM
agentorange's Avatar
STI Master
Member
 
Join Date: Mar 2006
Location: Perth
Posts: 712
Thanks: 0
Thanked 0 Times in 0 Posts
agentorange at standard level
Default

What does big end knocking sound like?
__________________
...He said Smooth Bee the skins is fat
I don't beg cause I'm not in begonia
I dress warm so that I won't catch pneumonia
My rhymes are stronger than ammonia
I'm a diamond, you're a cubic zirconia
Reply With Quote
  #9  
Old 23-03-2007, 12:47 PM
NEAT 04''s Avatar
WRX Hi Five Club
Member
 
Join Date: Aug 2006
Location: East Perth
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
NEAT 04' at standard level
Default

Quote:
Originally Posted by rextum
My advice is to get the guys at RMS to have a look, they seem to know of a common problem with these that sounds like a big end knock but is actually something else that costs far far less to fix.
Otherwise go for warranty and good luck.
do they hav a number i could call and just ask or should i take the car in.... if its wat u say it is i should b able to explain it to them over the phone.... no?

pawel
__________________
S14 Series II
Bolt Ons
Power FC

263 hub hp
Reply With Quote
  #10  
Old 23-03-2007, 01:00 PM
wannabe's Avatar
Sir AntiLag
Member
 
Join Date: Jun 2006
Location: Perth
Posts: 395
Thanks: 0
Thanked 0 Times in 0 Posts
wannabe at standard level
Default

Rms 9470 2444
Reply With Quote
Reply

Tags
cold, issue, start


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Welcome to Perth-WRX, click here to register!

All times are GMT +8. The time now is 10:08 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO