Will cost you the fittings.

other then that should be sweet, u kno if the fittings are expensive are or not? like dearly expensive? otherwise should be goood!
cheers dude

[url]http://www.perth-wrx.com/vb/showthread.php?t=4146&highlight=bosch[/url]

not sure how much
budget around $50-80

ok thats fine i am happy with that, yer i have pm'd balistic for more info, but should be interesting watchin it being installed

040 is an internal pump with a pick-up screen on the bottom of the pump. Bosch 044 can be fitted internal or external.

I've personally never seen an 040 installed in a WRX before, because most people go with the 044, 910 or 984, which all have a barbed inlet (and the 044 has a threaded inlet for your own screw-in barb), and people normally adapt the stock fuel pump sock to fit on the end.

It can be adapted to be used with a WRX, but you'll have to cut the bottom of the fuel pump assembly off, and mount the pump about 1cm from the bottom of the tank.

how often ppo get fuel starve problem with these pumps?

as in.. will you have fuel starve below half tank? quarter tank etc? cos i have a habit of not filling up the tank until the light comes on..

cheers

It'll have the same level of fuel starvation as a standard pump, if its installed correctly i.e. the pick up sock is at the same height as stock.

I had really bad starvation with less than half a tank, when I put the walbro in I also put an old STI pick up on it cos the one supplied was 90 degree & useless but since then I haven't had a problem so .......sock? pump? but no probs now.

If anyone is interested in Bosch 044 pumps, I'm selling them at the moment for $300 with warranty