|
|
LinkBack | Thread Tools | Display Modes |
#11
|
||||
|
||||
hey kenneth2koh
ive got a box for 2x12s I could sell... you'd just have to get another 12inch sub |
#12
|
||||
|
||||
Yep kenneth just need a 1.25 cu ft box , jaycar got em cheap , most audio joints will be able to sell em or sinisters offer would be good , used to run one of these myself but just wasnt enough , with jl's the like a box a bit bigger than they spec so take it up to 1.5 cu ft
__________________
such is brake dust |
#13
|
|||
|
|||
Alrite.. thanks feral... will go down to Jaycar later and have a look. hope its not too expensive.. hahahha...
|
#14
|
||||
|
||||
the box i have is pretty big - was made for the boot of a crx so its pretty big, i just want some shopping space LOL
|
#15
|
|||
|
|||
hahahha... that too big for me... thanks sinistr....
|
#16
|
|||
|
|||
Just borrow tools, buy some cheap MDF boards from bunnings and just make a simple squarish/retanglular shaped box. Then goto an uphostery place and buy some carpet and get urself some rubber glue =) bushstyles bombage. Bunnings would also be able to cut the boards for you for cheap maybe even free. Can also goto an audiohouse or somethin like that and pick up some plastic ports. you can get one's that you can just push into the wood but try find some you can screw into the wood over some gaskets to re-inforce them. between the boards you can even go cheapo and reinforce them with some thick double sided tape so you wont ever get rattles after a homejob on the box. Or even fold the carpeting over so you can use that to reinforce.
*shrugs* |
Tags |
box, woofer |
|
|