Perth-WRX.com

Perth-WRX.com (http://www.perth-wrx.com/vb/cmps_index.php)
-   Mechanicals (http://www.perth-wrx.com/vb/mechanicals/)
-   -   need more power.. any advice... (http://www.perth-wrx.com/vb/mechanicals/15672-need-more-power-any-advice.html)

superman 11-10-2007 02:07 PM

need more power.. any advice...
 
hello just took my car to RMS got a autronic fitted to my car.. leigh did a great job... on the bosch dyno i got 255kw at the engine at 7000 1/min vmax 260km/h
200 kw at the wheels...
the mods i have are vf23 turbo,front mount intercooler, 400 fuel pump, i think i have standard injectors.blow off vavle and a autronic .. 3' exhaust , some work has been done to the motor but not sure... running 4.444 drive line..
what size turbo and injectors should i get to get more power.. any advice would be great thanks...

Mister Two 11-10-2007 02:11 PM

how much power are you actually chasing? And what model WRX do you actually have? Judging by your 4.444 final drive box, its either a 02-06 WRX or 97-00 STI?

superman 11-10-2007 02:13 PM

i have a my00, looking to get 250kw at the wheels.. i am quessing the turbo and injectors will get me their...

DarkMoose 11-10-2007 02:16 PM

ROFL Pass some of the crack over here brother!

trainwrex 11-10-2007 02:19 PM

hmmm not on that engine for long...

ud need a big sucker turbo like a FPgreen at least. then ull prolly make around 240 kw atw on pump running 1.5bar which im sure ur 2.0ltr will die from.. hahha

Ull need a FMIC, 550 cc injectors as a min, an intank pump and a retune..

Cost:

2.5 gs for turbo plus 500 to fit
1000 injectors fitted
1000 retune...

BALISTC 11-10-2007 02:19 PM

How much boost?

If your injectors are out of fuel, you can probably make more power by swapping them and running more boost...but I doubt it.

superman 11-10-2007 02:24 PM

the mod i have done to the car is
Hyperflow Front Mount Intercooler 660 x 230 x 90mm
Custom S/S Intercooler piping
IHI VF23 Turbo
Walbro 550hp Fuel Pump
Blitz Blow off valve
APS Cold Air intake Guard mounted install / K&N Airfilter
3' exhaust from the turbo.
4.444 ratio gearbox and diff.
the boost is set at 1.5 at the moment...

Kato 11-10-2007 02:24 PM

Why do you want 250kW ATW?

Personally a goal of a faster time at Wanners/Collie/AHG/Drags would be better than a dyno sheet.

superman 11-10-2007 02:29 PM

just a rough idea.. all i need now is a bigger turbo .. so thats why i am asking you guys with the mods i have which will be best suit my car.. thats all..
maybe i only get 220kw at the wheels ..

nauli 11-10-2007 02:29 PM

[QUOTE=superman]hello just took my car to RMS got a autronic fitted to my car.. leigh did a great job... on the bosch dyno i got 255kw at the engine at 7000 1/min vmax 260km/h
200 kw at the wheels...
the mods i have are vf23 turbo,front mount intercooler, 400 fuel pump, i think i have standard injectors.blow off vavle and a autronic .. 3' exhaust , some work has been done to the motor but not sure... running 4.444 drive line..
what size turbo and injectors should i get to get more power.. any advice would be great thanks...[/QUOTE]
..and the reason you didn't ask Leigh for advice was?....


All times are GMT +8. The time now is 08:56 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO