ive got some 800s..

pm sent..

__________________
I'm a jockey kunts...

and replied...

and edited my post to indicate that i need sidefeeds

I've heard Tony Rigoli Performance do a re-drill of existing sidefeeds injectors for extra flow on an exchange basis. May be worth giving them a ring.

http://www.tonyrigoliperformance.com.au/products.htm

Pls report back....

__________________
"You can turn your back on a person, but, never turn your back on a drug. Especially when it's waving a razor-sharp hunting knife in your eye." - Raoul Duke

An email was sent before I posted this...lets see how they go for customer service

As for a standard 15% drivetrain loss I disagree. DT Loss is fixed for the same drivetrain pushing 200hp or 400hp. I calculate it as 50hp on a WRX by rule of thumb. It's not far off.
Thanks for the feedback guys, so in summary:
Yes 850cc will do it but will 740 or 650? Lets see 400hp is about 300kw afw...or 260 ish atw.
Found this calculator: deatschwerks calculator using 400hp at 0.5 BSFC @ 85%idc = 617.6 cc/min
So 650cc will do...
or 741.2 cc/min at a BSFC of 0.6 and idc <85%

Ok wtf is BSFC as I have NFI

__________________
Speak to Shane @ SMC Tyres, Unit 6/385 Sevenoaks St Beckenham WA 6107. Mobile 0413 128 087. Tell him Maddog sent you!

haha I hope your not expecting this from a TD04 Morgan?????

__________________
[COLOR="Red"]I have the right foot of Subaru death![/COLOR]

[SIGPIC][/SIGPIC]
365hp and 515nm

New Beast to arrive April 2015 - 365hp, 450nm, 0-100 in 4.4sec. AMG Goodness!

[QUOTE=maddog]An email was sent before I posted this...lets see how they go for customer service



Best off calling Rigolis they dont seem to answer to many emails...

__________________
11.1@125mph

What, a TD04 won't hit 400hp? Not even with a Verso tune?? WTF I am off to bowls...

__________________
Speak to Shane @ SMC Tyres, Unit 6/385 Sevenoaks St Beckenham WA 6107. Mobile 0413 128 087. Tell him Maddog sent you!

i think you'll need 2x td04's

__________________
MY93 Impreza GX 1.8L, 0hp, 0nm

Here's the feedback from Sam Rigoli confirming they can hi flow the yellow top 440cc side feed injectors :

Hi Morgan,
Yes we can hi flow them. The hi flowed ones can support up to 500hp. To do the four injectors your looking at $520.

Regards,

Sam Rigoli
Unit 11, 7 Birmingham Avenue
Villawood NSW, 2163
Sydney, Australia
Phone: +61 2 9727 0695
Fax: +61 2 9727 4697
www.tonyrigoliperformance.com.au
sales@tonyrigoliperformance.com.au

__________________
Speak to Shane @ SMC Tyres, Unit 6/385 Sevenoaks St Beckenham WA 6107. Mobile 0413 128 087. Tell him Maddog sent you!

$520 is a bit rich. Might as well buy some injectors of what ever flow you need and then sell off the old ones.

__________________
RS Liberty - Because WRX's are only good for parts...