Hi all,

My mrs bought me a 3" cat back exhaust from ebay but the
problem is that its from a full china/dylan spec TBE and it wont just
bolt up to the standard cat (she had no clue but its the thought that
counts).

I was wondering if anyone can recommend a exhaust place that
does decent work and doesn't charge $185 just to fit the exhaust
let alone do the mods to make it fit (that was one quote i got yesterday).

Any help would be greatly appreciated.

Wayne

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Seems reasonable price to me, I used Midas in Morley for this sort of work and did good job. Most muffler franchises can do this sort of work reasonably well I recon.

__________________
Funny looking German Subaru

Buy the rest of the exhuast?? Then you have an excuse to get a tune too!

__________________
Huge range of extinguisher brackets for cars!

http://kap.industries/

I got a dylan/china tbe...doesnt fit right...touches the underbody of the car at one spot and the dump pipe 'flexi part' it hard against the underbody of the geatbox chassis thingo..after some talks with Dylan and being told I put it on wrong 'which im 100% sure I didnt' and checked it over and over it only goes 1 fking way! I took it to 2 places to have it checked...prestiege in malaga and my mechanic in noranda..both confirmed it was either not for my model or just bad workmanship..anyway the short of it is I was told to bring it to asg to check it..but trying to book ur car into somewhere that are fully booked for 4 weeks and u work ages away..too hard..

For the price I paid it was more of a fk around to try get it even looked at. People will fix it..but they will charge u an arm n a leg and u wont have a nice SS job as an end result.

ive fitted 2 dylan spec exhausts to an 02 sti and a 06 wrx. all fit fine except the fact that the dump pipe mount was about an inch off reaching the threaded hole on the gearbox housing.

other then that, they were pretty good.

I agree that they are pretty good for the money and dont have any real
problems fitting the full TBE unfortunately mines only the cat back part
and its about a foot too short to bolt up to the standard cat


Would love to get verso but a bit skint at the moment and buying the
rest of the exhaust would end up costing me more then it would have
to buy a complete TBE package.

As i said before the mrs bought it for me and didnt really know what she was getting so im stuck with it for now

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

For custom exhausts both mild or stainless steel in any size (but typically 3-inch and mandrel bent) I can recommend Cypher Industries in O'Connor for price and quality with hi-flow cats. I've had 2 sets of exhausts through them with good results and support.

Got my Prodrive cat back fitted a couple of weeks ago by Mettams Mufflers in Morley. They had to modify it slightly to fit it the standard piping and charged me $80 which wasn't too bad.

Sweet, cheers mate thats exactly the answer i was looking for.

Did you speak to anyone in particular?

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Ask for Pat, Ph number is 9275 7034.