Hey guys,

Since my drivers power window is stuck half way down (and Subaru want $800 for a motor :/) I'm going to take off the door trim to have a looksie.

Does anyone have a guide on where all the screws and clips are before I go gung ho on it?

Cheers.

__________________
[COLOR="Gray"]550Nm off a 2L... Just wish it was in the dak dak...[/COLOR]

http://forums.evolutionm.net/showthread.php?t=42809

__________________
deadly treadly

On most cars that I have removed door trims from including my GC8 there are:

screw in the door handle surround

couple in the door jam where the hinge is.

pop the electric window controls out and disconnect (just don't forget to reconnect before you put everything back together.

After that its just a matter of feeling around the inner side of the trim and gently pulling as the plastic clips come away.

Also look for plastic covers that may cover screws, pop them off and see if there are any.

Easy job mate..... If you need a hand let me know.

See if you can go to the wreckers and get a motor, much cheaper I should imagine.

__________________
....slow and steady wins the race....fark that!!

Be gentle when popping out the window control panel - tabs break easily. Use two flat blade screwdrivers to lever out the "arrow" clips that hold the bottom & sides of the trim to the door. Apart from that, as above

__________________
MY99 WRX sedan WRC blue Sold :(
MY99 WRX sedan Dark blue pearl :D
MY97 Liberty Outback Ltd Wagon
1990 Mk3 Supra turbo fully rebuilt 7M-GTE (Older son)
1991 Celica GT4 (Younger son)

try not to break the plastic clips that hold the pannel into the door, they always brake n you can never find any spares when you wont them.