OK sorted, pulled plugs and checked all gaps on the last plug found a T piece with out a hose, found the other end which went to the manifold so hooked back up and tractor is now a WRX again :D . There are a fair few hoses that have been disconnected or just chopped off with no ends which make it an absolute PITA as you cannot tell if you have disconnected something or not, I am going to spend an afternoon and cap all these I think.

Good work .. tractors suck

[QUOTE=DJDINO]OK sorted, pulled plugs and checked all gaps on the last plug found a T piece with out a hose, found the other end which went to the manifold so hooked back up and tractor is now a WRX again :D . There are a fair few hoses that have been disconnected or just chopped off with no ends which make it an absolute PITA as you cannot tell if you have disconnected something or not, I am going to spend an afternoon and cap all these I think.[/QUOTE]


That would run to your map sensor.

[QUOTE=11secWrx]That would run to your map sensor.[/QUOTE]

There is a canister to the left of the radiator it has 3 hoses, one is disconnected but has a plastic disc on it, the hose that came off t'd there to the solenoid then to the manifold, I didn't check it because the thicker end has a 90 deg joiner and has nothing on the end.

[QUOTE=DJDINO]There is a canister to the left of the radiator it has 3 hoses, one is disconnected but has a plastic disc on it, the hose that came off t'd there to the solenoid then to the manifold, I didn't check it because the thicker end has a 90 deg joiner and has nothing on the end.[/QUOTE]

It will go to the map sensor up the line
..been there..

[QUOTE=DJDINO]Will you get a boot doing this ?[/QUOTE]
Pussy! :p
See you on the weekend.

[QUOTE=XT43]Pussy! :p
See you on the weekend.[/QUOTE]

How did I know you would be interested in my misfortune.