[QUOTE=jEstEr?;430883]The grimmspeed EBCS is a rebadged MAC one anyway[/QUOTE]

yes it is made by mac,

but it is not the shitty plastic one (similar to the prodrive) that most people use.

[QUOTE=Rossco;430878]The Power fc drives the factory boost system out of the box (as mine is set up)....... Have you tried it?
You have boost targets, gain and a .25 Kcgm overshoot safety threshold built in to the ecu.

Look under:
Settings> Boost> there will be 4 individual boost 'maps' available.

I have mine set: 1.65 Kcgm gain of 62....I get 1.66 constantly on the commander readout.

Note: I have my gain set high as it ramps the car on boost pretty hard (which I like).

If you have the pro you have the 0 road speed launch control too / [B][U]fuel cut [/U][/B]rpm limiter function....Bastard!

P.s the boost control kit is for Nissans & mazdas....On a scoob it uses all the factory wiring, factory map sensor, pressure exchange solenoid & bcs.[/QUOTE]

Pro has ignition cut doesn't it??

Edit: Beaten

[QUOTE=mattmy99;430893]Pro has igntition cut doesn't it??[/QUOTE]

For all your anti-lag type poping and farting needs.....apparently.

[QUOTE=mattmy99;430893]Pro has ignition cut doesn't it??

Edit: Beaten[/QUOTE]

Yeah it does......normal pfc fuel cuts.....distractions my end!

On a similar note to the original post... it reminded me of a post i put up on scoobymods about the readings i was getting with the blitz ebc in my car when i bought it, and one of the responses i got was this:

has anyone done something like this?

[quote]
Double post:

with the 3" turbo back, you have a great option.

Get this engine management for the low!

Go to tactrix.com and order a tactrix cable. Download the Enginuity (or romraider) and Ecuflash software from visualsinz.com.

Follow the instructions and load the "stage 2" map for model year 03 WRX.

This will give you a looooot more pep and you can run 16psi with it.

Im sure some other members will chime in that have done this and are running this map.

Also, while im on it, replace the stock uppipe for a catless unit. This will increase spool and prevent turbo damage from cat failure.

P.S. the above mention programs and maps are free. Cable is around 90.00 plus shipping.[/quote]